{"product_id":"dynamite-friction-830-31168r-disc-brake-rotor-front-right","title":"Dynamite Friction 830-31168R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-31168R) is engineered for precision braking performance on select BMW models. Designed with a vented, directional surface, this rotor enhances heat dissipation and braking consistency for vehicles such as the BMW 330i, 530e, and X5.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc type: Vented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 348 mm for optimal fit and performance\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 30 mm with discard thickness at 28.4 mm\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for improved water and debris evacuation\u003c\/li\u003e\n\u003cli\u003eRust resistant coating to extend rotor life\u003c\/li\u003e\n\u003cli\u003eHat finish in Geospec silver grey for corrosion resistance and aesthetics\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 16.7 mm diameter and 112 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple BMW models including 330i, 430i, 530i, i4, X3, and X6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDFC Geoperformance Rotor - Drilled and Slotted Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on rotors that combine drilled holes and precision slots to improve braking efficiency and heat management. This product line is designed to reduce brake fade and maintain consistent stopping power under demanding conditions. The directional surface pattern and vented design help channel heat and gases away from the rotor surface, making it suitable for performance-oriented BMW vehicles.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a vented design with a 348 mm outside diameter and a nominal thickness of 30 mm, ensuring durability and effective heat dissipation. The drilled and slotted surface improves brake pad bite and helps remove dust and moisture, which is critical for maintaining braking performance in wet or high-stress environments. The rotor’s directional surface is engineered to optimize airflow and debris clearance. The Geospec silver grey hat finish and rust resistant coating provide additional protection against corrosion, extending the rotor’s service life. With 5 bolt holes and a 112 mm bolt circle diameter, this rotor is specifically designed to fit a range of BMW models including the 330i, 430i Gran Coupe, 530e xDrive, and X5.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImproves braking performance on BMW 330i, 530i, and X5 models\u003c\/li\u003e\n\u003cli\u003eReduces brake fade during extended or aggressive driving\u003c\/li\u003e\n\u003cli\u003eEnhances heat dissipation to prevent rotor warping\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent stopping power in wet conditions\u003c\/li\u003e\n\u003cli\u003eProtects against rust and corrosion for longer rotor life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface is clean and free of any protective coatings before installation. Verify bolt hole alignment and torque specifications according to BMW manufacturer guidelines. Directional rotors must be installed with the rotation arrow pointing in the correct direction of wheel rotation to ensure optimal performance. It is recommended to replace brake pads when installing new rotors to maintain even wear and braking efficiency.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors are manufactured to meet or exceed OEM specifications for fit, form, and function. The rust resistant coating and precision machining contribute to reliable performance and durability. While specific warranty details are not provided, Dynamite Friction products are generally backed by quality control standards to ensure customer satisfaction and product longevity.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801077809333,"sku":"HBHR-830-31168R","price":149.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83031168R_Fro.jpg?v=1774642305","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-31168r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}