{"product_id":"dynamite-friction-830-42010r-disc-brake-rotor-rear-right","title":"Dynamite Friction 830-42010R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-42010R) is engineered for Jeep Cherokee models requiring reliable braking performance. This disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Jeep Cherokee vehicles\u003c\/li\u003e\n\u003cli\u003eDirectional drilled and slotted disc surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 12 mm with a discard thickness of 10.4 mm\u003c\/li\u003e\n\u003cli\u003eRust resistant coating for extended durability\u003c\/li\u003e\n\u003cli\u003e320 mm outside diameter and 33.5 mm height\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 15.7 mm diameter and 110 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eGeospec silver grey hat finish for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe 830-42010R rotor is designed with a 320 mm outside diameter and a height of 33.5 mm, providing a robust braking surface for the Jeep Cherokee. Its nominal thickness is 12 mm, with a discard thickness of 10.4 mm, ensuring safe replacement intervals. The rotor features a directional surface type combining drilled holes and slots, which helps to reduce brake fade by improving heat and gas dissipation during braking. The plain disc finish paired with a Geospec silver grey hat finish offers corrosion resistance, supported further by a rust resistant coating. The rotor mounts with five bolt holes, each 15.7 mm in diameter, arranged on a 110 mm bolt circle diameter, and a center hole diameter of 70 mm, matching the Jeep Cherokee’s specifications.\u003c\/p\u003e\u003ch2\u003eAbout the DFC Geoperformance Rotor - Drilled and Slotted Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted product line focuses on delivering rotors with enhanced thermal management and surface durability. The drilled and slotted design improves braking efficiency by allowing gases and debris to escape, reducing the risk of brake fade. This line is tailored for vehicles like the Jeep Cherokee that demand consistent braking performance in various driving conditions.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or warped rotors on Jeep Cherokee models\u003c\/li\u003e\n\u003cli\u003eAddresses brake fade caused by overheating during heavy braking\u003c\/li\u003e\n\u003cli\u003eImproves wet weather braking by channeling water away from the rotor surface\u003c\/li\u003e\n\u003cli\u003eReduces brake dust accumulation for cleaner braking components\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent pedal feel and stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation; replace if below the discard thickness of 10.4 mm. Clean the rotor surface to remove any protective coatings or oils before mounting. Verify bolt hole alignment with the Jeep Cherokee hub and torque bolts to manufacturer specifications. Directional rotors must be installed with the correct rotation direction to maintain performance benefits.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors undergo strict quality control to meet OEM standards. The rust resistant coating and Geospec silver grey hat finish contribute to long-term durability. Please consult product documentation or manufacturer resources for warranty details specific to part number 830-42010R.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801080823989,"sku":"HBHR-830-42010R","price":106.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83042010R_Fro.jpg?v=1774642327","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-42010r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}