{"product_id":"dynamite-friction-830-48061r-disc-brake-rotor-rear-right","title":"Dynamite Friction 830-48061R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-48061R) is engineered for heavy-duty Chevrolet and GMC trucks. Designed specifically for models like the Sierra 2500 HD, Sierra 3500 HD, Silverado 2500 HD, Silverado 3500 HD, and Suburban 3500 HD, this rotor offers reliable braking performance under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc brake rotor with drilled and slotted surface for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce brake fade during heavy use\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface optimized for enhanced braking efficiency\u003c\/li\u003e\n\u003cli\u003eRust resistant coating to extend rotor life\u003c\/li\u003e\n\u003cli\u003eGeospec silver grey hat finish for corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003eCompatible with 8-bolt lug pattern and 16.2 mm bolt hole diameter\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 360 mm and nominal thickness of 34 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDFC Geoperformance Rotor - Drilled and Slotted Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on rotors that combine drilled holes and slots to improve braking performance by enhancing heat dissipation and debris removal. This product line is designed to meet the demands of heavy-duty trucks, providing a balance of durability and performance. The directional surface pattern and vented rotor design help maintain consistent braking under load, making it suitable for Chevrolet and GMC heavy-duty models.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a 360 mm outside diameter and a nominal thickness of 34 mm, with a discard thickness of 32.5 mm to indicate when replacement is necessary. The rotor is vented to allow better airflow and heat management, reducing the risk of brake fade during extended use. The drilled and slotted surface type improves water and dust evacuation from the braking surface, enhancing stopping power and rotor longevity. The rotor’s hat is finished in Geospec silver grey, providing corrosion resistance, while the plain disc finish ensures consistent contact with brake pads. The rotor is designed with an 8-bolt hole pattern, each hole measuring 16.2 mm in diameter, and a bolt circle diameter of 180 mm, matching the stud\/lug hole circle diameter for proper fitment on compatible vehicles.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet Sierra 2500 HD, Sierra 3500 HD, Silverado 2500 HD, Silverado 3500 HD, and Suburban 3500 HD models\u003c\/li\u003e\n\u003cli\u003eHelps reduce brake fade during heavy towing or hauling\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to prevent rotor warping\u003c\/li\u003e\n\u003cli\u003eMinimizes rust and corrosion with protective coating\u003c\/li\u003e\n\u003cli\u003eEnhances braking performance in wet or dusty conditions with drilled and slotted design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor is installed on vehicles with an 8-lug wheel pattern and verify bolt hole diameter compatibility (16.2 mm). The directional surface requires correct orientation during installation to maintain optimal braking performance. Inspect the rotor thickness before installation; replace if below the discard thickness of 32.5 mm. Proper torque specifications should be followed for lug nuts to avoid rotor damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the DFC Geoperformance Rotor - Drilled and Slotted to meet industry standards for durability and performance. The rotor includes a rust-resistant coating and a corrosion-resistant hat finish to extend service life. Warranty information is available through the manufacturer and should be confirmed at the time of purchase.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801084854453,"sku":"HBHR-830-48061R","price":220.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83048061R_Fro.jpg?v=1774642361","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-48061r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}