{"product_id":"dynamite-friction-830-52013r-disc-brake-rotor-rear-right","title":"Dynamite Friction 830-52013R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-52013R) is engineered for Chevrolet Camaro and Pontiac Firebird models. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance braking performance and heat dissipation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet Camaro and Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003eDirectional, slotted and drilled surface for improved brake response\u003c\/li\u003e\n\u003cli\u003eVented rotor design for enhanced cooling\u003c\/li\u003e\n\u003cli\u003eRust resistant coating for extended durability\u003c\/li\u003e\n\u003cli\u003eGeospec silver grey hat finish for corrosion protection\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 26 mm with discard thickness at 24.7 mm\u003c\/li\u003e\n\u003cli\u003e305 mm outside diameter and 61.2 mm overall height\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 16.2 mm diameter and 118 mm bolt circle diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted by Dynamite Friction is a precision-engineered disc brake rotor designed specifically for the Chevrolet Camaro and Pontiac Firebird. This rotor features a vented design that helps dissipate heat more effectively during braking, reducing the risk of brake fade under demanding conditions. The directional surface combines drilled holes and slots to improve water, dust, and gas evacuation from the braking surface, which contributes to consistent brake pad contact and enhanced stopping power.\u003c\/p\u003e\u003cp\u003eConstructed with a plain disc finish and a Geospec silver grey hat finish, this rotor offers corrosion resistance to maintain performance and appearance over time. The rotor measures 305 mm in outside diameter with an overall height of 61.2 mm, fitting vehicles with a 5-lug bolt pattern and a 118 mm bolt circle diameter. The nominal thickness is 26 mm, with a discard thickness of 24.7 mm, ensuring reliable service life and safety.\u003c\/p\u003e\u003ch2\u003eAbout the DFC Geoperformance Rotor - Drilled and Slotted Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted product line focuses on delivering rotors that balance performance and durability. Featuring vented rotors with directional drilled and slotted surfaces, this line is designed to optimize heat dissipation and maintain consistent braking under various driving conditions. The rust resistant coating and Geospec silver grey hat finish provide additional protection against corrosion, making these rotors suitable for both daily driving and spirited use in Chevrolet Camaro and Pontiac Firebird vehicles.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImproves brake cooling to reduce fade during aggressive driving\u003c\/li\u003e\n\u003cli\u003eEnhances water and debris evacuation for consistent braking in wet conditions\u003c\/li\u003e\n\u003cli\u003ePrevents rotor corrosion with rust resistant coating and protective hat finish\u003c\/li\u003e\n\u003cli\u003eMaintains structural integrity with vented rotor design\u003c\/li\u003e\n\u003cli\u003eEnsures proper fitment for Chevrolet Camaro and Pontiac Firebird with 5-lug bolt pattern\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dynamite Friction 830-52013R rotor, ensure the rotor thickness is above the discard thickness of 24.7 mm for safe operation. The rotor is directional, so proper orientation during installation is critical for optimal performance. Verify the 5-bolt hole pattern with 16.2 mm diameter and 118 mm bolt circle diameter matches your vehicle specifications. Clean the rotor surface before installation to remove any protective coatings or residues.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors are manufactured to meet strict quality standards for durability and performance. The rust resistant coating and Geospec silver grey hat finish contribute to long-term corrosion protection. Please consult the manufacturer or product documentation for warranty details specific to part number 830-52013R.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801085116597,"sku":"HBHR-830-52013R","price":115.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83052013R_Fro.jpg?v=1774642364","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-52013r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}