{"product_id":"dynamite-friction-830-53004r-disc-brake-rotor-rear-right","title":"Dynamite Friction 830-53004R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-53004R) is engineered for reliable braking performance on select Chevrolet, Pontiac, and Saturn vehicles. Designed with a directional, slotted and drilled surface, this solid disc brake rotor offers enhanced heat dissipation and consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet Aura, Cobalt, Malibu, Pontiac G5, G6, Pursuit, Saturn HHR, and Ion models\u003c\/li\u003e\n\u003cli\u003eDirectional drilled and slotted surface for improved brake pad bite and heat management\u003c\/li\u003e\n\u003cli\u003eSolid rotor design with a nominal thickness of 14 mm and discard thickness of 12 mm\u003c\/li\u003e\n\u003cli\u003eRust resistant coating with Geospec silver grey hat finish for corrosion protection\u003c\/li\u003e\n\u003cli\u003eFive bolt holes with 14.3 mm diameter and 110 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 270 mm and height of 45.3 mm for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDFC Geoperformance Rotor - Drilled and Slotted Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on rotors that combine drilled holes and slots to optimize braking efficiency. This design helps to reduce brake fade by allowing gases and heat to escape more effectively during heavy braking. The directional surface pattern is engineered to maintain consistent contact with brake pads, improving overall braking response for vehicles such as the Chevrolet Cobalt and Pontiac G6.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a solid construction with a nominal thickness of 14 mm and a discard thickness of 12 mm, ensuring durability and safety throughout its service life. The rotor's 270 mm outside diameter and 45.3 mm height are designed to match factory specifications for compatible Chevrolet, Pontiac, and Saturn models. The rotor surface is finished plain, while the hat is coated in a Geospec silver grey rust-resistant finish to protect against corrosion. The drilled and slotted surface type enhances heat dissipation and helps maintain braking performance under demanding conditions. The rotor includes five bolt holes with a diameter of 14.3 mm and a bolt circle diameter of 110 mm, matching the stud\/lug hole pattern of the specified vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Chevrolet Aura, Malibu, and Pontiac Pursuit\u003c\/li\u003e\n\u003cli\u003eImproves braking performance in vehicles experiencing brake fade during heavy use\u003c\/li\u003e\n\u003cli\u003eAddresses rotor corrosion issues with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eEnhances heat dissipation for better brake pad life and consistent stopping power\u003c\/li\u003e\n\u003cli\u003eSuitable for vehicles requiring directional drilled and slotted rotors for optimal braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation; replace if below the discard thickness of 12 mm. Clean the rotor surface to remove any protective coatings or debris before mounting. Verify bolt hole alignment with the vehicle’s hub using the 110 mm bolt circle diameter and 14.3 mm bolt hole diameter. Proper torque specifications should be followed to avoid rotor warping. This rotor is designed for vehicles with five lug nuts and a center hole diameter of 65.7 mm.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 830-53004R rotor to meet or exceed OEM specifications for fit, form, and function. The rust-resistant coating and precision machining contribute to long service life and reliable braking performance. Warranty information is available through the manufacturer and should be consulted for specific coverage details.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801085247669,"sku":"HBHR-830-53004R","price":98.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83053004R_Fro.jpg?v=1774642365","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-53004r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}