{"product_id":"dynamite-friction-830-54075l-disc-brake-rotor-front-left","title":"Dynamite Friction 830-54075L Disc Brake Rotor - Front Left","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-54075L) is engineered for reliable braking performance on Ford Fiesta and Transit Courier models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance heat dissipation and maintain consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Fiesta and Transit Courier\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved brake response\u003c\/li\u003e\n\u003cli\u003eVented rotor design with 278 mm outside diameter\u003c\/li\u003e\n\u003cli\u003eRust resistant coating with Geospec silver grey hat finish\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 23 mm and discard thickness of 21 mm\u003c\/li\u003e\n\u003cli\u003eFour bolt holes with 13.1 mm diameter and 108 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 63.55 mm and height of 44 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThis Dynamite Friction rotor is constructed with a vented design to allow better airflow and heat dissipation during braking, reducing the risk of brake fade. The rotor’s surface is both drilled and slotted, which helps to evacuate gases, dust, and water, improving braking efficiency under various driving conditions. The directional brake surface ensures optimal performance when installed correctly according to the rotation direction.\u003c\/p\u003e\u003cp\u003eThe rotor’s nominal thickness is 23 mm, with a discard thickness of 21 mm, indicating when replacement is necessary to maintain safe braking. The rotor features a plain disc finish and a Geospec silver grey finish on the hat, which includes a rust-resistant coating to extend the rotor’s service life. The four bolt holes, each 13.1 mm in diameter, and a bolt circle diameter of 108 mm ensure proper fitment on compatible Ford models.\u003c\/p\u003e\u003ch2\u003eDFC Geoperformance Rotor - Drilled and Slotted Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on delivering rotors with enhanced surface designs for improved braking performance. This product line combines drilled holes and slots with vented rotor construction to optimize heat management and debris removal. The Geospec silver grey hat finish adds corrosion resistance, making these rotors suitable for daily driving and moderate performance applications on vehicles like the Ford Fiesta and Transit Courier.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImproves braking performance on Ford Fiesta and Transit Courier vehicles\u003c\/li\u003e\n\u003cli\u003eReduces brake fade caused by overheating during extended braking\u003c\/li\u003e\n\u003cli\u003eHelps prevent water and debris buildup on the rotor surface for consistent stopping power\u003c\/li\u003e\n\u003cli\u003eAddresses rotor corrosion with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eMaintains structural integrity with vented rotor design for heat dissipation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor is installed with the directional surface oriented correctly according to the wheel rotation. Verify that the bolt hole pattern and center hole diameter match the vehicle specifications. Measure rotor thickness before installation and replace if below the discard thickness of 21 mm. Clean the rotor surface to remove any protective coatings or contaminants before mounting the brake pads.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors are manufactured to meet OEM specifications for fit and function. The rust-resistant coating and precision machining contribute to durability and consistent braking performance. Please refer to the manufacturer’s warranty information for coverage details.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801086361781,"sku":"HBHR-830-54075L","price":111.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83054075L_Fro.jpg?v=1774642375","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-54075l-disc-brake-rotor-front-left","provider":"PartCatalog","version":"1.0","type":"link"}