{"product_id":"dynamite-friction-830-54082r-disc-brake-rotor-front-right","title":"Dynamite Friction 830-54082R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-54082R) is engineered for reliable braking performance on Ford Focus and Lincoln MKC vehicles. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal thickness: 25 mm with a discard thickness of 23 mm for safe replacement intervals\u003c\/li\u003e\n\u003cli\u003eVented rotor design for improved cooling and reduced brake fade\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface to aid in debris removal and water dispersion\u003c\/li\u003e\n\u003cli\u003ePlain disc finish with a Geospec silver grey hat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating applied to extend rotor life\u003c\/li\u003e\n\u003cli\u003eFive bolt holes with a 13.9 mm diameter and 108 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 335 mm and height of approximately 49 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDFC Geoperformance Rotor - Drilled and Slotted Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on rotors that combine drilled holes and precision slots to optimize braking efficiency. This product line is designed to improve heat dissipation and reduce brake dust buildup, which helps maintain consistent brake performance. The directional surface pattern further enhances water and gas evacuation, making it suitable for vehicles like the Ford Focus and Lincoln MKC that require dependable braking under varied driving conditions.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented to allow air to flow between the rotor surfaces, reducing heat buildup during braking. The 335 mm outside diameter and 49.2 mm height ensure compatibility with specified Ford and Lincoln models. The rotor’s directional slotted and drilled surface improves pad bite and helps channel away water and debris, which can otherwise reduce braking efficiency. The plain disc finish combined with a Geospec silver grey hat finish and rust resistant coating provides durability against corrosion, extending the rotor’s service life. The five bolt holes with a 13.9 mm diameter and 108 mm bolt circle diameter match factory specifications for secure mounting.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Focus and Lincoln MKC models requiring 335 mm vented rotors\u003c\/li\u003e\n\u003cli\u003eAddresses brake fade caused by excessive heat through vented design\u003c\/li\u003e\n\u003cli\u003eReduces brake dust accumulation with slotted and drilled surface\u003c\/li\u003e\n\u003cli\u003eImproves wet weather braking by channeling water away from the rotor surface\u003c\/li\u003e\n\u003cli\u003eHelps prevent rust and corrosion with protective coating and finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 23 mm before installation. Properly clean the rotor surface to remove any protective oils before mounting. Verify bolt hole alignment with the 108 mm bolt circle diameter and use the correct torque specifications for the five lug holes. Directional rotors must be installed following the indicated rotation direction to maintain optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors undergo rigorous quality control to meet OEM standards. The rust resistant coating and durable finishes contribute to long-term reliability. Please consult the manufacturer or product documentation for specific warranty details related to part number 830-54082R.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801086623925,"sku":"HBHR-830-54082R","price":149.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83054082R_Fro.jpg?v=1774642377","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-54082r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}