{"product_id":"dynamite-friction-830-54161l-disc-brake-rotor-rear-left","title":"Dynamite Friction 830-54161L Disc Brake Rotor - Rear Left","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-54161L) is engineered for Ford Excursion, F-250 Super Duty, and F-350 Super Duty models. This vented disc brake rotor combines durability and performance with a rust-resistant coating and a directional, slotted, and drilled surface design.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Excursion, F-250 Super Duty, and F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce brake fade\u003c\/li\u003e\n\u003cli\u003eRust-resistant coating for extended rotor life\u003c\/li\u003e\n\u003cli\u003eGeospec silver grey hat finish for corrosion protection\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 30 mm with discard thickness at 28 mm\u003c\/li\u003e\n\u003cli\u003eEight bolt holes with 16.1 mm diameter and 170 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 326 mm and height of 98.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted by Dynamite Friction is designed to meet the braking demands of heavy-duty Ford trucks such as the Excursion, F-250 Super Duty, and F-350 Super Duty. This rotor features a vented design that helps dissipate heat more effectively during braking, reducing the risk of brake fade under heavy loads or extended use. The directional surface is both drilled and slotted, which aids in removing brake dust, gases, and water from the rotor surface, improving braking consistency and performance.\u003c\/p\u003e\u003cp\u003eConstructed with a nominal thickness of 30 mm and a discard thickness of 28 mm, this rotor ensures a long service life while maintaining safety standards. The rotor’s hat is finished in Geospec silver grey, providing additional corrosion resistance, complemented by a rust-resistant coating on the disc surface. The rotor’s dimensions include an outside diameter of 326 mm and an overall height of 98.5 mm, with eight bolt holes sized at 16.1 mm diameter on a 170 mm bolt circle, matching the factory specifications for the specified Ford models.\u003c\/p\u003e\u003ch2\u003eDFC Geoperformance Rotor - Drilled and Slotted Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on delivering rotors with enhanced thermal management and surface design. The drilled and slotted pattern is directional, optimized to improve braking performance by facilitating better heat dissipation and debris removal. This product line is suitable for heavy-duty applications where consistent braking performance and rotor longevity are critical.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReduces brake fade during heavy towing or hauling\u003c\/li\u003e\n\u003cli\u003eImproves braking performance in wet or dusty conditions\u003c\/li\u003e\n\u003cli\u003eMinimizes rotor surface corrosion with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eMaintains consistent brake pad contact with slotted and drilled surface\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Excursion, F-250 Super Duty, and F-350 Super Duty models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 28 mm before installation. Clean the rotor surface to remove any protective coatings or residues before mounting. Verify bolt hole alignment with the vehicle’s hub using the 170 mm bolt circle diameter and 16.1 mm bolt hole diameter. Proper torque specifications should be followed to avoid rotor warping or uneven wear.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 830-54161L rotor to meet OEM standards for fitment and performance. The rust-resistant coating and Geospec silver grey hat finish contribute to extended rotor life. While no specific warranty information is provided, the product is designed for durability and consistent braking performance on compatible Ford models.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801088229557,"sku":"HBHR-830-54161L","price":165.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83054161L_Fro.jpg?v=1774642381","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-54161l-disc-brake-rotor-rear-left","provider":"PartCatalog","version":"1.0","type":"link"}