{"product_id":"dynamite-friction-830-54223r-disc-brake-rotor-front-right","title":"Dynamite Friction 830-54223R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-54223R) is engineered for Ford F-250 Super Duty and F-350 Super Duty trucks. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance braking performance and heat dissipation under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford F-250 Super Duty and F-350 Super Duty models\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved brake pad bite and debris removal\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce heat buildup and maintain braking efficiency\u003c\/li\u003e\n\u003cli\u003eRust resistant coating for extended durability\u003c\/li\u003e\n\u003cli\u003eGeospec silver grey hat finish for corrosion protection and aesthetic appeal\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 38 mm with discard thickness at 36.4 mm\u003c\/li\u003e\n\u003cli\u003eEight bolt holes with 16.2 mm diameter and 170 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOverall outside diameter of 363 mm and height of 100.1 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe 830-54223R rotor from Dynamite Friction is part of the DFC Geoperformance Rotor - Drilled and Slotted line, designed specifically for heavy-duty Ford trucks like the F-250 Super Duty and F-350 Super Duty. This rotor features a vented design that helps dissipate heat more effectively during braking, reducing the risk of brake fade in demanding driving conditions. The directional surface is both drilled and slotted, which aids in removing brake dust, gases, and water from the rotor surface, improving overall braking response and pad life.\u003c\/p\u003e\u003cp\u003eThe rotor’s nominal thickness is 38 mm, with a discard thickness of 36.4 mm, ensuring a long service life before replacement is necessary. The hat section is finished in Geospec silver grey, providing corrosion resistance and a clean appearance. Additionally, the rotor is coated with a rust-resistant layer to protect against environmental damage. With eight bolt holes sized at 16.2 mm diameter and a bolt circle diameter of 170 mm, this rotor fits securely on the specified Ford models.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement rotor for worn or warped rotors on Ford F-250 Super Duty and F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003eImproves braking performance in heavy-duty towing and hauling scenarios\u003c\/li\u003e\n\u003cli\u003eReduces brake fade caused by excessive heat buildup\u003c\/li\u003e\n\u003cli\u003eHelps prevent rust and corrosion on braking surfaces\u003c\/li\u003e\n\u003cli\u003eEnhances brake pad contact and debris removal for consistent stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation to confirm it meets the nominal thickness of 38 mm and is above the discard thickness of 36.4 mm. Clean the rotor surface to remove any protective coatings or residues before mounting. Verify bolt hole alignment with the vehicle’s hub using the 170 mm bolt circle diameter and 16.2 mm bolt hole diameter. Proper torque specifications should be followed to secure the rotor safely.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 830-54223R rotor to meet OEM specifications for Ford F-250 Super Duty and F-350 Super Duty trucks. The rust-resistant coating and Geospec silver grey hat finish contribute to the rotor’s durability and corrosion resistance. While no specific warranty information is provided, Dynamite Friction products are engineered for reliable performance in demanding automotive applications.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801089147061,"sku":"HBHR-830-54223R","price":231.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83054223R_Fro.jpg?v=1774642389","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-54223r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}