{"product_id":"dynamite-friction-830-58038r-disc-brake-rotor-rear-right","title":"Dynamite Friction 830-58038R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-58038R) is engineered for Acura and Honda vehicles, specifically designed to meet the braking demands of the MDX, Passport, and Pilot models. This disc brake rotor combines durability with enhanced heat dissipation for consistent braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal thickness: 11 mm\u003c\/li\u003e\n\u003cli\u003eDiscard thickness: 9 mm\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 330 mm\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved cooling\u003c\/li\u003e\n\u003cli\u003eHat finish in Geospec silver grey with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 14.6 mm diameter and 120 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter: 70.1 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 39 mm\u003c\/li\u003e\n\u003cli\u003eCompatible with 5 stud\/lug hole configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Geoperformance Rotor - Drilled and Slotted\u003c\/h2\u003e\u003cp\u003eThe DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on rotors that feature a directional surface combining drilled holes and slots. This design aids in heat dissipation and gas evacuation during braking, which helps maintain consistent stopping power and reduces brake fade. The Geospec silver grey hat finish not only provides corrosion resistance but also adds a durable protective layer to extend rotor life.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is manufactured with a nominal thickness of 11 mm and a discard thickness of 9 mm, ensuring a reliable service life before replacement is necessary. The rotor’s 330 mm outside diameter and 39 mm height are optimized for the braking systems of Acura MDX, Honda Passport, and Honda Pilot models. The directional slotted and drilled surface improves water and debris clearance, enhancing braking performance in various driving conditions. The rotor includes a rust-resistant coating and a Geospec silver grey hat finish to protect against corrosion and wear. The 5 bolt holes with a 14.6 mm diameter and a 120 mm bolt circle diameter match the factory specifications for secure fitment.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura MDX, Honda Passport, and Honda Pilot for direct replacement\u003c\/li\u003e\n\u003cli\u003eHelps reduce brake fade during extended or aggressive braking\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to prevent rotor warping\u003c\/li\u003e\n\u003cli\u003eEnhances braking response in wet or debris-prone environments\u003c\/li\u003e\n\u003cli\u003eProtects against rust and corrosion for longer rotor life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation; replace if below the discard thickness of 9 mm. The directional slotted and drilled surface requires correct orientation during installation to maintain optimal performance. Verify the 5-lug bolt pattern and 120 mm bolt circle diameter match the vehicle specifications. Clean the rotor surface before mounting to remove any protective coatings or residues. Use proper torque specifications for lug nuts to avoid rotor damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors undergo rigorous quality control to meet OEM standards. The rust-resistant coating and Geospec silver grey finish contribute to durability and corrosion resistance. While no specific warranty information is provided, the product is designed to meet the performance and safety requirements for Acura MDX, Honda Passport, and Honda Pilot vehicles.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51816872280245,"sku":"HBHR-830-58038R","price":109.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83058038R_Fro.jpg?v=1774643249","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-58038r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}