{"product_id":"gates-26263-intercooler-to-engine-cold-side","title":"Gates 26263  - Intercooler to Engine (Cold Side)","description":"\u003ch2\u003eOverview of Gates Turbocharger Hose Kit 26263\u003c\/h2\u003e\u003cp\u003eThe Gates Turbocharger Hose Kit (Molded) part number 26263 is engineered for reliable performance in heavy-duty Chevrolet and GMC trucks. Designed specifically for turbocharged applications, this hose kit ensures proper airflow and pressure management in models like the Sierra 2500 HD and Silverado 3500 HD.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet and GMC heavy-duty trucks including Sierra 2500 HD, Sierra 3500, Silverado 2500 HD, and Silverado 3500 HD\u003c\/li\u003e\n\u003cli\u003eCenterline length of 5.25 inches (133 mm) for precise fitment\u003c\/li\u003e\n\u003cli\u003e3.25 inch (83 mm) inside diameter on both ends for consistent airflow\u003c\/li\u003e\n\u003cli\u003eIncludes two clamps with .75 inch (19.1 mm) band width for secure sealing\u003c\/li\u003e\n\u003cli\u003eClamp bolt type: .25 in. - 28 male pipe thread with .4375 in. hex-head nuts\u003c\/li\u003e\n\u003cli\u003eClamping range between 3.125 and 3.4375 inches (79.4 to 87.3 mm) to accommodate slight variations in hose diameter\u003c\/li\u003e\n\u003cli\u003eRecommended clamp torque of 75 in\/lbs for optimal sealing without damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Turbocharger Hose Kits (Molded) Product Line\u003c\/h2\u003e\u003cp\u003eThe Gates Turbocharger Hose Kits (Molded) line is designed to provide durable, molded hose solutions tailored for turbocharged engines. These kits focus on maintaining consistent pressure and airflow under high-temperature conditions typical of turbocharger systems. The molded design ensures a precise fit and reduces the risk of leaks or hose failure, making it suitable for demanding applications in Chevrolet and GMC heavy-duty trucks.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis turbocharger hose kit features a molded hose with a 3.25 inch (83 mm) inside diameter on both ends, ensuring uniform airflow through the turbo system. The centerline length of 5.25 inches (133 mm) allows for a direct fit in the turbocharger assembly of compatible Chevrolet and GMC trucks. The kit includes two clamps, each with a .75 inch (19.1 mm) band width, designed to provide a secure seal. The clamps use a .25 inch - 28 male pipe thread bolt type and .4375 inch hex-head nuts, allowing for reliable tightening within a clamping range of 3.125 to 3.4375 inches (79.4 to 87.3 mm). The recommended torque of 75 in\/lbs ensures the clamps hold firmly without damaging the hose.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked turbocharger hoses in Chevrolet Sierra 2500 HD and Silverado 3500 HD models\u003c\/li\u003e\n\u003cli\u003ePrevention of boost leaks that can reduce engine performance and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eRestoration of proper turbocharger pressure for consistent engine power delivery\u003c\/li\u003e\n\u003cli\u003eElimination of air intake leaks that may cause turbo lag or engine hesitation\u003c\/li\u003e\n\u003cli\u003eMaintenance of turbo system integrity under high heat and pressure conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify hose dimensions and clamp sizes against your vehicle’s turbocharger assembly before installation\u003c\/li\u003e\n\u003cli\u003eUse a torque wrench to tighten clamps to the recommended 75 in\/lbs to avoid over-tightening\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for debris or damage to ensure a proper seal\u003c\/li\u003e\n\u003cli\u003eReplace clamps if they show signs of corrosion or wear during installation\u003c\/li\u003e\n\u003cli\u003eEnsure the hose is properly seated on both ends before tightening clamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGates manufactures the Turbocharger Hose Kits (Molded) to meet stringent quality standards for durability and performance in heavy-duty applications. While specific warranty details are not provided, Gates products typically undergo rigorous testing to ensure reliability in Chevrolet and GMC turbocharged trucks. For warranty information, refer to Gates’ official documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"Gates","offers":[{"title":"Default Title","offer_id":52138084237493,"sku":"BBSC-26263","price":84.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/ZO_26263_Top.jpg?v=1775231850","url":"https:\/\/www.partcatalog.com\/products\/gates-26263-intercooler-to-engine-cold-side","provider":"PartCatalog","version":"1.0","type":"link"}