{"product_id":"stoptech-128-40062r-disc-brake-rotor","title":"Stoptech 128.40062R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eStopTech Sport Cross-Drilled Disc Brake Rotors Overview\u003c\/h2\u003e\u003cp\u003eThe StopTech Sport Cross-Drilled Disc Brake Rotors (part number 128.40062R) are engineered for Acura TL models requiring reliable braking performance. These rotors feature a vented design with cross-drilled surfaces to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCross-drilled surface for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eVented rotor design with pillar-style vanes\u003c\/li\u003e\n\u003cli\u003eCoated hat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFloating disc mounting for thermal expansion\u003c\/li\u003e\n\u003cli\u003eCompatible with Acura TL models\u003c\/li\u003e\n\u003cli\u003eOverall diameter: 310 mm (12.205 inches)\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 24.9 mm (0.980 inches)\u003c\/li\u003e\n\u003cli\u003eDiscard thickness: 23.0 mm (0.906 inches)\u003c\/li\u003e\n\u003cli\u003e5 lug holes with 12.7 mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight approximately 7.95 kg (17.5 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout StopTech Sport Cross-Drilled Disc Brake Rotors\u003c\/h2\u003e\u003cp\u003eThe StopTech Sport Cross-Drilled Disc Brake Rotors line is designed to provide enhanced braking performance through improved cooling and reduced brake fade. The cross-drilled surface pattern allows for better heat and gas dissipation, while the vented rotor construction with pillar-style vanes promotes airflow to maintain optimal rotor temperature. The coated hat finish helps protect against corrosion, extending rotor life. This product line is suitable for drivers seeking a balance between daily driving reliability and spirited performance.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThese rotors measure 310 mm in outside diameter and have a nominal thickness of 24.9 mm, with a discard thickness of 23.0 mm, ensuring they meet precise wear limits. The overall height is 45.4 mm, and the center hole diameter is 64.2 mm. The rotors feature a floating disc mounting system to accommodate thermal expansion and reduce stress. The 5 lug holes are spaced on a 114.3 mm bolt circle diameter, with each hole measuring 12.7 mm in diameter. The rotors do not include ABS tone rings or bearings.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReduces brake fade during aggressive driving or towing\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to prevent rotor warping\u003c\/li\u003e\n\u003cli\u003eEnhances braking consistency in Acura TL vehicles\u003c\/li\u003e\n\u003cli\u003eAddresses corrosion issues with coated hat finish\u003c\/li\u003e\n\u003cli\u003eSupports replacement of worn or damaged rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure compatibility with Acura TL models before installation. Verify rotor thickness and discard limits during replacement. Properly torque lug nuts to manufacturer specifications and inspect brake pads for wear. It is recommended to replace rotors in pairs to maintain balanced braking performance. Clean rotor surfaces before installation to remove any protective coatings or contaminants.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eStopTech Sport Cross-Drilled Disc Brake Rotors are manufactured to meet or exceed OEM standards for fit, form, and function. The coated finish provides additional corrosion resistance for extended service life. Warranty information should be confirmed with the original product documentation or manufacturer, as it may vary by region.\u003c\/p\u003e","brand":"Stoptech","offers":[{"title":"Default Title","offer_id":44573359243445,"sku":"FLMN-128.40062R","price":191.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/CE_12840062R_Fro.jpg?v=1774639441","url":"https:\/\/www.partcatalog.com\/products\/stoptech-128-40062r-disc-brake-rotor","provider":"PartCatalog","version":"1.0","type":"link"}