Rack And Pinion Housing C-Clips

Replacement Parts > Steering > Hardware, Fasteners and Fittings

Rack And Pinion Housing C-Clips

Important: To get started, click the blue "Filter Options" button to select your vehicle and then use the filters to narrow your options.

Important: To get started, select your vehicle on the left and then use the filters to narrow your options.

What are Rack and Pinion Housing C-Clips?

Rack and Pinion Housing C-Clips are small metal clips which secure the rack and pinion gear in the housing and keep it in position.

What is the purpose of Rack and Pinion Housing C-Clips?

The purpose of Rack and Pinion Housing C-Clips is to ensure the gear is securely held in place and not damaged due to vibration or pressure.

How can I determine if mine is faulty?

You can determine if your Rack and Pinion Housing C-Clips are faulty by inspecting them for signs of wear and tear or damage. If there are any signs of wear or damage, it is likely that the clip is faulty and needs to be replaced.

Can a faulty one cause damage?

Yes, a faulty Rack and Pinion Housing C-Clip can cause damage if it fails to hold the gear in place, which can lead to further wear and tear or damage to the gear or other components of the steering system.

How do I replace it?

To replace a Rack and Pinion Housing C-Clip, follow these steps:

  1. Remove the old clip using a flathead screwdriver or similar tool.
  2. Clean the area around the clip with a cloth or rag.
  3. Insert the new clip into the housing and ensure it is properly secured.
  4. Check the clip is in the correct position and is securely fastened.