Mirrors

Door mirrors and interior mirror components take more abuse than most body parts - sun exposure, car washes, parking lot impacts, and years of power-folding cycles all take a toll. A cracked or shattered mirror glass is the most common repair, but full mirror assemblies often need replacement when housings crack, power-adjust motors fail, or turn signal repeaters stop working. When buying, confirm whether your vehicle has power-folding, heated glass, blind-spot monitoring sensors, or integrated turn signals - these features are built into the assembly and must match your trim level exactly. OEM mirrors guarantee a direct fit and preserve factory finish, while quality aftermarket units (CAPA-certified where available) typically cost 30–60% less. For glass-only replacements, verify flat vs. convex curvature and driver vs. passenger side before ordering.

Signs you need replacement

• Cracked, shattered, or missing mirror glass. Even a hairline crack distorts your view enough to be a safety issue - and in many states, a failed inspection. Glass-only replacements are a straightforward DIY fix on most vehicles.
• Mirror housing is cracked, faded, or broken off entirely. A snapped mounting tab or split housing from a sideswipe usually means replacing the full assembly, since individual housings are rarely sold separately.
• Power mirror won't adjust or holds only one position. A failed mirror drive motor is often the culprit. If only one direction is affected, the motor may be salvageable; if it's completely dead, expect to replace the motor or full assembly.
• Heated mirror doesn't clear frost or fog. Failed heating elements are embedded in the glass, so the fix is a glass replacement rather than an electrical repair - typically a straightforward swap.
• Mirror vibrates excessively at highway speeds. A loose or damaged pivot mechanism inside the housing causes this. It may look fine parked but create a dangerous blind spot above 50 mph.
• Turn signal repeater or puddle light in the mirror stops working. If the bulb checks out, the mirror's internal wiring harness or connector has likely failed - often requiring a full assembly replacement.

Frequently asked questions

• Do I need to match the exact mirror assembly to my trim level? Yes - mirror assemblies are highly trim-specific. A base model's manual-adjust mirror won't accept the wiring harness for a power-folding, heated, or blind-spot-equipped unit. Always cross-reference by year, make, model, and trim or option package when ordering, not just by vehicle line.
• Are aftermarket door mirrors as good as OEM? CAPA-certified aftermarket mirrors meet independent fit and finish standards and are a solid choice for most repairs. For vehicles with integrated cameras, radar sensors, or advanced driver-assist systems (ADAS), OEM or OEM-equivalent mirrors are strongly recommended - sensor calibration can be affected by even minor dimensional differences in the housing.
• How much does a door mirror replacement cost, and is it a DIY job? Glass-only replacements typically run $15–$60 and take 10–20 minutes with basic hand tools or a heat gun. Full power mirror assemblies range from $40 on the low end to $400+ for trucks and luxury vehicles with heated, folding, or camera-equipped units. Most bolt-on assembly swaps are beginner-friendly; mirrors with ADAS sensors may require dealer calibration after installation.