/live/media/AZ/AZ_R6R406U_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
ADVICS R6R406U Disc Brake Rotor - Rear
| Brand | ADVICS R6R406U |
|---|---|
| Position | Rear |
| Material | High carbon |
| Discard Thickness | 0.37 |
| Discard Thickness | 9.4 |
| Nominal Thickness | 0.433 |
| Nominal Thickness | 11.0 |
| Brake Surface Finish | Non-directional |
| Overall Height | 2.811 |
| Overall Height | 71.4 |
| Outside Diameter | 12.008 |
| Outside Diameter | 305.0 |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Solid |
| Center Hole Diameter | 69 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Stud/Lug Hole Quantity | 5 |
| Product line | Ultra-Premium OE Replacement |
| Fits | Kia · 5 vehicles |
OE replacement rotor. High-carbon steel construction promotes efficient airflow and heat management.
Smooth, non-directional finish. Helps deliver consistent braking performance and easier bedding-in.
Solid rotor design. Provides a straightforward, dependable disc brake replacement.
Cross-references ADVICS R6R406U, Centric Parts 121.50031 and PowerStop JBR1705 for the same application. See all 10.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Rear OE Replacement Rotor for Sorento
ADVICS R6R406U is an ultra-premium OE replacement disc brake rotor for the rear of select Kia Sorento models. It is built from high carbon steel with a smooth, non-directional brake surface to support consistent braking performance and even pad contact.
Key Features
- High carbon steel construction for improved heat handling
- Solid rotor design for rear brake applications
- Non-directional brake surface finish for controlled pad bedding
- 12.008 in. outside diameter and 2.811 in. overall height
- 5-lug pattern with 114.3 mm bolt circle and 69 mm center hole
- OE replacement fitment for rear brake service
Product Details
The ADVICS Ultra-Premium OE Replacement line focuses on direct-fit brake components built to match original equipment specifications. This R6R406U rear brake rotor uses high carbon, high-quality steel to help air move through the rotor efficiently while maintaining a stable braking surface. With a nominal thickness of 11.0 mm, discard thickness of 9.4 mm, and a smooth solid design, it is suited for rear brake service on 2016-2020 Kia Sorento models. This part cross-references PowerStop JBR1705 for the same application.
Fitment
- Fits 2016-2020 Kia Sorento, rear.
Common Replacement Reasons
- Brake pulsation from rotor wear or thickness variation
- Noise caused by uneven rotor surfaces
- Reduced braking consistency during normal stop-and-go driving
- Rear rotor replacement during brake pad service
- Corrosion or scoring on the braking surface
Installation Notes
Confirm rotor dimensions, bolt pattern, and center bore before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake noise or pedal vibration. Follow the vehicle manufacturer’s torque specifications and perform proper brake bedding after installation. Verify rear-only application before ordering; this rotor is not listed for front use.
Quality Assurance
ADVICS positions this rotor within its Ultra-Premium OE Replacement line, using high carbon steel and a non-directional finish to support OE-style brake service on the Kia Sorento. Part number R6R406U is listed with confirmed interchange references for direct replacement matching.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2020 | Kia | Sorento | Rear | Ultra-Premium OE Replacement |
| 2019 | Kia | Sorento | Rear | Ultra-Premium OE Replacement |
| 2018 | Kia | Sorento | Rear | Ultra-Premium OE Replacement |
| 2017 | Kia | Sorento | Rear | Ultra-Premium OE Replacement |
| 2016 | Kia | Sorento | Rear | Ultra-Premium OE Replacement |
| No rows match your filter. | ||||