/live/media/AP/AP_2243_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 2243 Exhaust Muffler - Rear Right
| Brand | AP Exhaust 2243 |
|---|---|
| Position | Rear Right |
| Body Height | 7 |
| Body Length | 14 |
| Body Material | Aluminized steel |
| Body Width | 9 |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 1.88 |
| Inlet Location | Right lower |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | Aa |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2.25 |
| Outlet Location | Center lower |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 18 |
| Series | Challenge |
| Shape | Oval |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Buick, Chevrolet, and Pontiac · 25 vehicles |
Aluminized steel. Corrosion-resistant construction for service replacement use.
Baffled design. Helps maintain an OE-comparable exhaust note.
Challenge series. AP Exhaust replacement line for listed exhaust applications.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 2243 is a baffled exhaust muffler from the Challenge series, built with aluminized steel and an oval body for OE-comparable sound control. It is a fitment-based replacement for dual-exhaust applications on select Buick, Pontiac, and Chevrolet models.
- Aluminized steel construction for corrosion resistance in a service replacement muffler.
- Baffled muffler design with OE-comparable sound level.
- Oval body shape with right-lower inlet and center-lower outlet pipe connections.
- Challenge series replacement for select dual-exhaust applications.
Detailed Description
AP Exhaust 2243 is engineered as a regular-grade exhaust muffler with a baffled internal design and an oval housing measuring 14 inches long, 9 inches wide, and 7 inches high. The 1.88-inch inlet and 2.25-inch outlet support the specified pipe connections, while the OE-comparable sound level keeps exhaust tone close to factory expectations. This part number 2243 is listed for rear-right placement on 2000-2008 Chevrolet Monte Carlo, 1997-2008 Pontiac Grand Prix, 2005-2008 Buick LaCrosse, and 2005-2007 Buick Allure applications. Part number 2243 is also a fitment match for the same rear-right location on these vehicles.
The Challenge series focuses on replacement mufflers for vehicles that use a welded OE exhaust assembly. For buyers searching for a Chevrolet Monte Carlo muffler, Pontiac Grand Prix exhaust muffler, or Buick LaCrosse rear right muffler, AP Exhaust 2243 provides a direct service-part option for the listed dual-exhaust configurations.
What It Helps Address
- Exhaust noise that has become louder or uneven.
- Rust damage or deterioration in the muffler body.
- Replacement needs for welded OE exhaust assemblies.
- Fitment requirements for dual-exhaust rear-right applications.
Installation Notes
Verify the rear-right fitment, inlet and outlet sizes, and dual-exhaust configuration before installation. The OE system notes indicate a welded assembly, so matching the listed application details is important for proper replacement. Confirm the vehicle’s exhaust routing and connection style against the part number 2243 specifications before beginning work.
Quality Assurance
AP Exhaust positions the Challenge series as a replacement muffler line for OE-style service applications. This part is built with aluminized steel and a baffled design to match the listed sound and fitment requirements.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2008 | Buick | LaCrosse | 3.6L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2008 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2007 | Buick | Allure | 3.6L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2007 | Buick | LaCrosse | 3.6L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2007 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2006 | Buick | Allure | 3.6L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2006 | Buick | LaCrosse | 3.6L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2006 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2005 | Buick | Allure | 3.6L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2005 | Buick | LaCrosse | 3.6L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2005 | Chevrolet | Monte Carlo | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (Including "SS"); Dual Exhaust |
| 2005 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2004 | Chevrolet | Monte Carlo | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (Including "SS"); Dual Exhaust |
| 2004 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2003 | Chevrolet | Monte Carlo | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (Including "SS"); Dual Exhaust |
| 2003 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2002 | Chevrolet | Monte Carlo | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust, Chrome Tip Applications |
| 2002 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2001 | Chevrolet | Monte Carlo | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust, Chrome Tip Applications |
| 2001 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 2000 | Chevrolet | Monte Carlo | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust, Chrome Tip Applications |
| 2000 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1999 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1998 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1997 | Pontiac | Grand Prix | 3.8L | V6 | Rear Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| No rows match your filter. | ||||||