/live/media/AP/AP_2528_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 2528 Exhaust Muffler - Right
| Brand | AP Exhaust 2528 |
|---|---|
| Position | Right |
| Body Height | 5.5 |
| Body Length | 12 |
| Body Material | Aluminized steel |
| Body Width | 11 |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Location | Center lower |
| Inlet Outside Diameter | 1.75 |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | A |
| Muffler Type | Baffled |
| Outlet Location | Right upper |
| Outlet Outside Diameter | 2 |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 23.5 |
| Series | Challenge |
| Shape | Oval |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Acura · 5 vehicles |
Challenge series. Application-specific exhaust muffler line for service replacement use.
Baffled design. Helps control exhaust tone with an OE-comparable sound level.
Aluminized steel body. Built for practical corrosion resistance in exhaust service.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 2528 is a Challenge series exhaust muffler built for a direct-fit repair on select Acura TL applications. It uses an oval, baffled design with OE-comparable sound levels and aluminized steel construction for a practical replacement solution.
Key Features
- Challenge series exhaust muffler for service replacement use
- Oval baffled design with OE-comparable sound level
- Aluminized steel body for corrosion resistance in exhaust service
- Center lower 1.75-inch inlet and right upper 2-inch outlet
- Fits 2004-2008 Acura TL, right
Detailed Description
This AP Exhaust muffler, part number 2528, is built around a regular-grade aluminized steel body with a 23.5-inch overall length, 12-inch body length, 11-inch body width, and 5.5-inch body height. The baffled internal design and oval shape support a controlled exhaust tone, while the inlet and outlet pipe layout matches the listed application. For buyers searching for an Acura TL exhaust muffler replacement, AP Exhaust 2528 provides a fitment-specific option for the right side of 2004-2008 Acura TL models.
The Challenge line is positioned as a service-oriented exhaust solution with application-specific dimensions and pipe locations. AP Exhaust 2528 is a practical choice when replacing a worn muffler on the Acura TL and restoring the original exhaust routing. This part number 2528 is also referenced for the same application as a Monroe Shocks & Struts cross-reference in some catalogs.
Common Issues It Can Address
- Exhaust noise from a worn or damaged muffler
- Rust-related deterioration in the muffler body
- Incorrect exhaust routing after prior repair work
- Loss of OE-comparable exhaust tone
- Fitment issues on a right-side Acura TL muffler replacement
Installation Notes
Fits 2004-2008 Acura TL, right. Verify inlet and outlet pipe orientation, overall length, and body dimensions before installation. The OE system was a welded assembly on the listed application, so related exhaust components may need attention during repair. Confirm the existing exhaust layout matches the Challenge LTW application notes before final assembly.
Quality Assurance
AP Exhaust 2528 is built as a regular-grade replacement muffler using aluminized steel and an OE-comparable sound profile. Its application-specific dimensions and pipe configuration support a direct service replacement for the listed Acura TL fitment.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2008 | Acura | TL | 3.2L | V6 | Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 2007 | Acura | TL | 3.2L | V6 | Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 2006 | Acura | TL | 3.2L | V6 | Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 2005 | Acura | TL | 3.2L | V6 | Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 2004 | Acura | TL | 3.2L | V6 | Right | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| No rows match your filter. | ||||||