/live/media/AP/AP_3135_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3135 Exhaust Muffler - Rear
| Brand | AP Exhaust 3135 |
|---|---|
| Position | Rear |
| Body Diameter | 6 |
| Body Length | 18 |
| Body Material | Aluminized steel |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 1.88 |
| Inlet Location | Center upper |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | 120° r |
| Muffler Type | Baffled |
| Outlet Location | Right lower |
| Outlet Outside Diameter | 1.75 |
| Outlet Quantity | 1 |
| Outlet Type | Spout |
| Overall Length | 26.25 |
| Series | Challenge |
| Shape | Round |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Dodge and Plymouth · 66 vehicles |
Challenge series. Replacement muffler line with OE-comparable sound control.
Aluminized steel. Corrosion-resistant body material for exhaust service.
Baffled design. Internal flow path built for controlled exhaust tone.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Exhaust Muffler Overview
AP Exhaust 3135 is a round exhaust muffler from the Challenge series, built for OE-comparable sound control and direct replacement applications. It uses a baffled internal design and aluminized steel construction for service in welded exhaust systems.
Key Features
- Challenge series exhaust muffler for replacement use
- Baffled design with OE-comparable sound level
- Aluminized steel body for corrosion resistance
- Round 6-inch body with 18-inch body length
- Center upper 1.88-inch inlet and right lower 1.75-inch outlet
- Fits welded exhaust layouts with pipe and spout connections
Detailed Fitment and Design
This AP Exhaust muffler, part number 3135, is listed for a wide range of compact Dodge and Plymouth applications from 1981-1990, including Dodge Omni, Dodge Charger, Dodge Rampage, Plymouth Horizon, Plymouth Scamp, and Plymouth Turismo. Fitment includes rear and N/A positions depending on the vehicle and exhaust configuration, with notes for catalytic converter and resonator combinations where applicable. The muffler configuration, inlet and outlet placement, and OE-comparable sound level make AP Exhaust 3135 a practical replacement for vehicles that used welded factory exhaust assemblies.
Common Replacement Uses
- Restores a damaged or rusted muffler assembly
- Addresses exhaust noise that has become louder than stock
- Replaces a worn muffler in welded factory exhaust systems
- Supports repair of exhaust routing with center-inlet, offset-outlet layout
- Helps correct fitment issues on listed Dodge and Plymouth applications
Installation Notes
Verify the inlet and outlet orientation, body dimensions, and vehicle-specific notes before installation. This part number 3135 is used in applications with catalytic converter and resonator variations, so match the existing exhaust layout to the catalog notes for the exact vehicle. Professional exhaust installation is recommended for welded-system replacement work.
Quality Assurance
AP Exhaust 3135 is built as a regular-grade replacement muffler in the Challenge line, with aluminized steel construction and an OE-comparable sound profile for listed applications.
| Year | Make | Model | Submodel | # Doors | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 1990 | Dodge | Omni | Base | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1990 | Plymouth | Horizon | Base | 4 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1989 | Dodge | Omni | America | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1989 | Plymouth | Horizon | America | 4 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1988 | Dodge | Omni | America | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1988 | Plymouth | Horizon | America | 4 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1987 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Functionally approved Single Outlet system - replaces Dual Outlet (86-87 models only).; with Catalytic Converter |
| 1987 | Dodge | Charger | — | 2 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine, with Catalytic Converter, with Resonator |
| 1987 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1987 | Dodge | Omni | — | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Functionally approved Single Outlet system - replaces Dual Outlet (86-87 models only).; with Catalytic Converter |
| 1986 | Dodge | Charger | — | 2 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine, with Catalytic Converter, with Resonator |
| 1986 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1986 | Dodge | Omni | GLH | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine; with Catalytic Converter |
| 1986 | Dodge | Omni | GLH | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Functionally approved Single Outlet system - replaces Dual Outlet (1986 models only).; with Catalytic Converter |
| 1986 | Dodge | Omni | — | — | 1.6L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Dodge | Omni | — | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Plymouth | Horizon | — | 4 Door | 1.6L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (96 H.P.); with Catalytic Converter |
| 1986 | Plymouth | Horizon | — | 4 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (96 H.P.); with Catalytic Converter |
| 1985 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Functionally approved Single Outlet system - replaces Dual Outlet (86-87 models only).; with Catalytic Converter |
| 1985 | Dodge | Charger | — | 2 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine, with Catalytic Converter, with Resonator |
| 1985 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1985 | Dodge | Omni | GLH | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine; with Catalytic Converter |
| 1985 | Dodge | Omni | Base | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1985 | Dodge | Omni | SE | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1985 | Dodge | Omni | GLH | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Functionally approved Single Outlet system - replaces Dual Outlet (1986 models only).; with Catalytic Converter |
| 1985 | Dodge | Omni | — | — | 1.6L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Plymouth | Horizon | — | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (101, 110 H.P.); with Catalytic Converter, with Resonator |
| 1985 | Plymouth | Horizon | — | 4 Door | 1.6L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (96 H.P.); with Catalytic Converter |
| 1985 | Plymouth | Horizon | — | 4 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (96 H.P.); with Catalytic Converter |
| 1984 | Dodge | Charger | 2.2 | 2 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine, with Catalytic Converter, with Resonator |
| 1984 | Dodge | Charger | Shelby | 2 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine, with Catalytic Converter, with Resonator |
| 1984 | Dodge | Charger | — | 2 Door | 1.6L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1984 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1984 | Dodge | Omni | — | 4 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1984 | Dodge | Omni | — | — | 1.6L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1984 | Dodge | Rampage | — | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter and Resonator |
| 1984 | Plymouth | Horizon | — | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (101, 110 H.P.); with Catalytic Converter, with Resonator |
| 1984 | Plymouth | Horizon | — | 4 Door | 1.6L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (96 H.P.); with Catalytic Converter |
| 1984 | Plymouth | Horizon | — | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (96 H.P.); with Catalytic Converter |
| 1984 | Plymouth | Turismo | — | 2 Door | 1.6L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1984 | Plymouth | Turismo | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1983 | Dodge | Charger | — | 2 Door | 1.6L | L4 | N/A | Challenge LTW; (1.6L); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with two Catalytic Converters |
| 1983 | Dodge | Charger | — | 2 Door | 1.7L | L4 | N/A | Challenge LTW; (1.6L); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with two Catalytic Converters |
| 1983 | Dodge | Charger | Shelby | 2 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine, with Catalytic Converter, with Resonator |
| 1983 | Dodge | Charger | 2.2 | 2 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine, with Catalytic Converter, with Resonator |
| 1983 | Dodge | Charger | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter, without Resonator |
| 1983 | Dodge | Omni | — | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with one Catalytic Converter |
| 1983 | Dodge | Omni | — | 4 Door | 1.6L | L4 | N/A | Challenge LTW; (1.6L); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with two Catalytic Converters |
| 1983 | Dodge | Omni | — | 4 Door | 1.7L | L4 | N/A | Challenge LTW; (1.6L); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with two Catalytic Converters |
| 1983 | Dodge | Rampage | — | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1983 | Dodge | Rampage | — | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine with Catalytic Converter |
| 1983 | Plymouth | Horizon | — | 4 Door | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with one Catalytic Converter |
| 1983 | Plymouth | Horizon | — | 4 Door | 1.6L | L4 | N/A | Challenge LTW; (1.6L); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with two Catalytic Converters |
| 1983 | Plymouth | Scamp | — | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1983 | Plymouth | Scamp | — | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; High Performance Engine with Catalytic Converter |
| 1983 | Plymouth | Turismo | — | 2 Door | 2.2L | L4 | N/A | Challenge LTW; (1.6L); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with two Catalytic Converters |
| 1982 | Dodge | Omni | — | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1982 | Dodge | Omni | — | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; without Catalytic Converter |
| 1982 | Dodge | Rampage | — | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1982 | Plymouth | Horizon | Base | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1982 | Plymouth | Horizon | Base | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; without Catalytic Converter |
| 1981 | Dodge | Omni | — | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1981 | Dodge | Omni | — | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; without Catalytic Converter |
| 1981 | Plymouth | Horizon | Base | — | 2.2L | L4 | N/A | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1981 | Plymouth | Horizon | Base | — | 2.2L | L4 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; without Catalytic Converter |
| No rows match your filter. | ||||||||