/live/media/AP/AP_3161_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3161 Exhaust Muffler
| Brand | AP Exhaust 3161 |
|---|---|
| Body Height | 3.25 |
| Body Length | 13 |
| Body Material | Aluminized steel |
| Body Width | 7.75 |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2 |
| Inlet Location | Center |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | C/o |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2 |
| Outlet Location | Right center |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 16.5 |
| Series | Challenge |
| Shape | Oval |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Jeep · 29 vehicles |
Challenge series. Application-specific muffler for OE-style exhaust replacement service.
Aluminized steel. Corrosion-resistant body material for exhaust-system durability.
Baffled design. Helps control exhaust flow and maintain a factory-style tone.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 3161 is a Challenge series exhaust muffler built for Jeep CJ applications that require a center inlet and right-center outlet layout. It uses an oval, baffled design with aluminized steel construction and OE-comparable sound level characteristics.
Key Features
- Aluminized steel body for corrosion resistance in exhaust service.
- Baffled muffler design for controlled exhaust flow and sound.
- Oval body shape with center inlet and right-center outlet pipe connections.
- OE-comparable sound level for a factory-style exhaust note.
- Challenge series AP Exhaust 3161 for direct replacement service.
Detailed Description
This AP Exhaust muffler is engineered around the dimensions and connection layout needed for specific Jeep CJ and Scrambler exhaust systems. The 16.5-inch overall length, 13-inch body length, and 2-inch inlet and outlet sizes make AP Exhaust 3161 a fitment-specific replacement for vehicles that use this configuration. The Challenge series design focuses on maintaining a factory-style exhaust tone while matching the original pipe routing used on these Jeep applications.
Fits 1981 Jeep Scrambler, N/A. Fits 1981-1982 Jeep CJ5, N/A. Fits 1981-1982 Jeep CJ7, N/A. Fits 1982 Jeep Scrambler, N/A. Fits 1983 Jeep CJ5, N/A. Fits 1983 Jeep CJ7, N/A. Fits 1983 Jeep Scrambler, N/A. Fits 1984-1985 Jeep Scrambler, N/A. Fits 1984-1986 Jeep CJ7, N/A. Fits 1986 Jeep CJ7, N/A. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Uses
- Restores a damaged or rusted muffler on a Jeep CJ or Scrambler exhaust system.
- Addresses excessive exhaust noise from a worn muffler core or shell.
- Replaces a muffler with the correct center-inlet, right-center-outlet layout.
- Supports repair of an OE-style exhaust system that uses a baffled muffler.
- Helps correct fitment issues caused by mismatched body size or pipe diameter.
Installation Notes
Verify inlet and outlet diameter, body length, and outlet location before installation. This muffler is intended for applications listed with a welded OE exhaust system, so confirm the surrounding exhaust components and catalytic converter configuration match the vehicle notes. Professional exhaust installation is recommended for proper alignment and sealing.
Quality Assurance
AP Exhaust 3161 is part of the Challenge series and is built with aluminized steel for exhaust-system durability. Its OE-comparable sound level and application-specific dimensions support consistent replacement performance on listed Jeep CJ and Scrambler models.
| Year | Make | Model | Liters | Cylinders | Notes |
|---|---|---|---|---|---|
| 1986 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1986 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1986 | Jeep | CJ7 | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1986 | Jeep | CJ7 | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1985 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1985 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1985 | Jeep | CJ7 | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1985 | Jeep | CJ7 | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1985 | Jeep | Scrambler | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1985 | Jeep | Scrambler | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1985 | Jeep | Scrambler | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1985 | Jeep | Scrambler | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1984 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1984 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1984 | Jeep | CJ7 | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1984 | Jeep | CJ7 | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1984 | Jeep | Scrambler | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1984 | Jeep | Scrambler | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1984 | Jeep | Scrambler | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; except California |
| 1984 | Jeep | Scrambler | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1983 | Jeep | CJ5 | 2.5L | L4 | Challenge LTW; (1983); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1983 | Jeep | CJ7 | 2.5L | L4 | Challenge LTW; (1983); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1983 | Jeep | Scrambler | 2.5L | L4 | Challenge LTW; (1983); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| 1982 | Jeep | CJ5 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; California models |
| 1982 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; California models |
| 1982 | Jeep | Scrambler | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; California models |
| 1981 | Jeep | CJ5 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; California models |
| 1981 | Jeep | CJ7 | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter; California models |
| 1981 | Jeep | Scrambler | 4.2L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Catalytic Converter |
| No rows match your filter. | |||||