/live/media/AP/AP_3180_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3180 Exhaust Muffler
| Brand | AP Exhaust 3180 |
|---|---|
| Body Height | 4.06 |
| Body Length | 22 |
| Body Material | Aluminized steel |
| Body Width | 10.5 |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2 |
| Inlet Location | Left center |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | O/oo-se |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2 |
| Outlet Location | Right center |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 24 |
| Series | Challenge |
| Shape | Oval |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Buick, Chevrolet, Oldsmobile, and Pontiac · 30 vehicles |
OE-comparable sound. Keeps exhaust tone close to original equipment for a familiar driving feel.
Aluminized steel body. Helps resist corrosion in everyday exhaust service.
Challenge series design. Built as a regular-grade muffler for replacement applications.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 3180 is a regular-grade exhaust muffler from the Challenge series, built for applications that use a 2-inch pipe inlet and 2-inch pipe outlet. Its oval, baffled design and OE-comparable sound level make it a practical replacement for restoring exhaust function without changing the vehicle’s original character.
Key Features
- Aluminized steel body for corrosion resistance in everyday service.
- Oval baffled construction with an OE-comparable sound level.
- 2-inch pipe inlet and 2-inch pipe outlet for direct exhaust routing.
- Challenge series muffler with a regular-grade build.
- Fits applications where the OE system was a welded assembly.
Detailed Description
AP Exhaust 3180 is an exhaust muffler engineered around a 24-inch overall length, 22-inch body length, and 10.5-inch body width, with a 4.06-inch body height. The aluminized steel construction and baffled internal layout are suited to replacement work where the original exhaust used a welded assembly, including Fits 1984-1986 Buick Century, N/A, Fits 1984-1986 Chevrolet Celebrity, N/A, Fits 1984-1986 Oldsmobile Cutlass Ciera, N/A, and Fits 1984-1986 Pontiac 6000, N/A. This AP Exhaust muffler is a fitment-based solution for restoring exhaust flow and sound control on Buick Century, Chevrolet Celebrity, Oldsmobile Cutlass Ciera, and Pontiac 6000 applications. Part number 3180 identifies the Challenge muffler configuration for these vehicles.
What It Helps Address
- Exhaust noise that has become louder than original equipment levels.
- Loss of muffler function from corrosion or internal wear.
- Replacement needs on welded exhaust assemblies.
- Fitment requirements for 2-inch inlet and outlet pipe connections.
- Restoring OE-style exhaust tone on older GM mid-size platforms.
Installation Notes
Verify pipe diameter, inlet and outlet location, and overall muffler dimensions before installation. This part uses a left-center inlet and right-center outlet with pipe-style connections, so alignment should be checked against the existing exhaust layout. Because the OE system was welded on the listed applications, installation may require exhaust work to match the original routing. Confirm the vehicle-specific fitment notes for 1984-1986 Buick Century, Chevrolet Celebrity, Oldsmobile Cutlass Ciera, and Pontiac 6000 before ordering.
Quality Assurance
AP Exhaust identifies this muffler as part of its Challenge series and specifies an OE-comparable sound level for the listed applications. Part number 3180 is built with aluminized steel and a baffled design to support replacement use on the covered Buick Century, Chevrolet Celebrity, Oldsmobile Cutlass Ciera, and Pontiac 6000 fitments.
| Year | Make | Model | Body Type | Liters | Cylinders | Notes |
|---|---|---|---|---|---|---|
| 1986 | Buick | Century | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Chevrolet | Celebrity | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Oldsmobile | Cutlass Ciera | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Pontiac | 6000 | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Buick | Century | Wagon | 4.3L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Buick | Century | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Buick | Century | Wagon | 3.0L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Chevrolet | Celebrity | Wagon | 4.3L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Chevrolet | Celebrity | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Chevrolet | Celebrity | Wagon | 2.8L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Oldsmobile | Cutlass Ciera | Wagon | 4.3L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Oldsmobile | Cutlass Ciera | Wagon | 3.0L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Pontiac | 6000 | Wagon | 4.3L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Pontiac | 6000 | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Pontiac | 6000 | Wagon | 2.8L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Buick | Century | Wagon | 4.3L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Buick | Century | Wagon | 3.0L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 1st Design |
| 1984 | Buick | Century | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Buick | Century | Wagon | 3.0L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 2nd Design |
| 1984 | Chevrolet | Celebrity | Wagon | 4.3L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Chevrolet | Celebrity | Wagon | 2.8L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 1st Design |
| 1984 | Chevrolet | Celebrity | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Chevrolet | Celebrity | Wagon | 2.8L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 2nd Design |
| 1984 | Oldsmobile | Cutlass Ciera | Wagon | 3.0L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 1st Design |
| 1984 | Oldsmobile | Cutlass Ciera | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Oldsmobile | Cutlass Ciera | Wagon | 3.0L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 2nd Design |
| 1984 | Pontiac | 6000 | Wagon | 4.3L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Pontiac | 6000 | Wagon | 2.8L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 1st Design |
| 1984 | Pontiac | 6000 | Wagon | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1984 | Pontiac | 6000 | Wagon | 2.8L | V6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; 2nd Design |
| No rows match your filter. | ||||||