/live/media/AP/AP_3219_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3219 Exhaust Muffler - Rear
| Brand | AP Exhaust 3219 |
|---|---|
| Position | Rear |
| Body Diameter | 4 |
| Body Length | 16.5 |
| Body Material | Aluminized steel |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2.5 |
| Inlet Location | Center |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | C/cr |
| Muffler Type | Baffled |
| Outlet Location | Center |
| Outlet Outside Diameter | 2.25 |
| Outlet Quantity | 1 |
| Outlet Type | Spout |
| Overall Length | 26.5 |
| Series | Challenge |
| Shape | Round |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Cadillac, Chevrolet, and Pontiac · 17 vehicles |
OE-comparable sound. Delivers a factory-style exhaust tone for replacement service.
Aluminized steel. Helps resist corrosion in demanding exhaust environments.
Challenge series. Application-specific muffler line for direct replacement work.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 3219 is a rear exhaust muffler for select full-size GM applications. It uses a round, baffled design with OE-comparable sound output and aluminized steel construction for a direct replacement-style exhaust repair.
Key Features
- Round muffler body with a baffled internal design
- Aluminized steel construction for corrosion resistance in exhaust service
- Center inlet and center outlet layout for application-specific routing
- OE-comparable sound level for a factory-style exhaust tone
- Challenge series muffler, part number 3219
Detailed Description
AP Exhaust 3219 is built as a regular-grade exhaust muffler with a 4-inch body diameter, 16.5-inch body length, and 26.5-inch overall length. The center inlet accepts a 2.5-inch pipe, while the center outlet uses a 2.25-inch spout, making it a fitment-specific solution for rear exhaust service on vehicles such as the Cadillac Brougham, Chevrolet Caprice, Chevrolet Impala, and Pontiac Parisienne. The Challenge series focuses on a practical replacement profile, and part number 3219 is specified for applications where the original exhaust system was welded together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Uses
- Replacing a worn or rusted rear muffler
- Restoring factory-style exhaust sound after system damage
- Repairing a welded exhaust section with an application-specific muffler
- Addressing exhaust leaks caused by corrosion or fatigue
- Returning proper exhaust flow in select rear exhaust layouts
Installation Notes
Fits 1985-1989 Chevrolet Caprice, rear. Fits 1989 Chevrolet Caprice, rear. Fits 1985 Chevrolet Impala, rear. Fits 1990-1992 Cadillac Brougham, rear. Fits 1985-1986 Pontiac Parisienne, rear. Review the vehicle notes before installation, especially where the OE system was welded and replacement of related parts is recommended. Part number 3219 should be matched to the listed application and exhaust routing before installation.
Quality Assurance
AP Exhaust supplies application-specific exhaust components for replacement service. The Challenge series is built around OE-style sound and fitment requirements for the listed applications.
| Year | Make | Model | Body Type | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 1992 | Cadillac | Brougham | — | RWD | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1992 | Cadillac | Brougham | — | RWD | 5.7L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1991 | Cadillac | Brougham | — | RWD | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1991 | Cadillac | Brougham | — | RWD | 5.7L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1990 | Cadillac | Brougham | — | RWD | 5.7L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1989 | Chevrolet | Caprice | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1989 | Chevrolet | Caprice | Sedan | — | 5.7L | V8 | Rear | Challenge LTW; (1989); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1988 | Chevrolet | Caprice | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1987 | Chevrolet | Caprice | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1987 | Chevrolet | Caprice | Coupe | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Chevrolet | Caprice | Coupe | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Chevrolet | Caprice | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1986 | Pontiac | Parisienne | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Converter |
| 1985 | Chevrolet | Caprice | Coupe | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Chevrolet | Caprice | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Chevrolet | Impala | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1985 | Pontiac | Parisienne | Sedan | — | 5.0L | V8 | Rear | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with Converter |
| No rows match your filter. | ||||||||