/live/media/AP/AP_3236_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3236 Exhaust Muffler
| Brand | AP Exhaust 3236 |
|---|---|
| Body Height | 4.06 |
| Body Length | 19 |
| Body Material | Aluminized steel |
| Body Width | 10.5 |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2.25 |
| Inlet Location | Center |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | C/o |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2.25 |
| Outlet Location | Right center |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 22 |
| Series | Challenge |
| Shape | Oval |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Jeep · 54 vehicles |
OE-comparable sound. Baffled muffler design helps maintain a factory-style exhaust note.
Aluminized steel body. Built for corrosion resistance in exhaust service.
Challenge series. Application-focused replacement line for select exhaust repairs.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 3236 is a regular-grade exhaust muffler from the Challenge series, built for Jeep applications that use a welded OE exhaust assembly. It features an oval aluminized steel body with a baffled design and OE-comparable sound level for a direct replacement-style repair.
With a 2.25-inch center inlet and 2.25-inch right-center outlet, this muffler is suited for specific Jeep Cherokee, Jeep Comanche, and Jeep Wagoneer fitments. AP Exhaust 3236 is a practical choice when replacing a worn muffler on a Jeep Cherokee or similar factory exhaust setup.
Key Features
- Aluminized steel construction for corrosion resistance in exhaust service.
- Baffled muffler design for controlled exhaust flow and OE-comparable sound.
- Oval body profile with 22-inch overall length for application-specific fitment.
- 2.25-inch center inlet and 2.25-inch right-center outlet pipe connections.
- Challenge series muffler for Jeep exhaust repair applications.
Detailed Description
This AP Exhaust muffler, part number 3236, is engineered around the dimensions and connection layout used in select Jeep exhaust systems. The welded OE assembly notes in the fitment data indicate that the original exhaust may require replacement of related components during service, and the inlet orientation should be matched carefully to the vehicle-specific configuration. For buyers searching for a Jeep Cherokee muffler, Jeep Comanche exhaust muffler, or Jeep Wagoneer replacement muffler, AP Exhaust 3236 provides a direct-fit service part for the listed applications.
The Challenge series focuses on straightforward replacement fitment with a regular-grade build and a sound level comparable to OE. The aluminized steel body, oval shape, and baffled internal design make this muffler suitable for restoring exhaust function without changing the factory-style character of the system. Part number 3236 is also a useful reference when cross-checking AP Exhaust 3236 against other catalog listings.
What It Helps Address
- Excessive exhaust noise from a worn muffler.
- Rust damage in the muffler body or seams.
- Restricted exhaust flow caused by internal deterioration.
- Fitment issues on welded factory exhaust assemblies.
- Replacement needs for Jeep Cherokee, Jeep Comanche, and Jeep Wagoneer exhaust service.
Installation Notes and Tips
Match the inlet and outlet orientation to the listed fitment notes before installation. Several applications specify a center nipple inlet, while others call for an offset nipple inlet, so confirm the vehicle configuration before ordering. The fitment notes also indicate that some OE systems were welded assemblies and may require replacement of related parts noted in the catalog. Verify the application details for your Jeep Cherokee, Jeep Comanche, or Jeep Wagoneer before beginning exhaust service.
Quality Assurance
AP Exhaust 3236 is built as a regular-grade replacement muffler with aluminized steel construction and OE-comparable sound characteristics. The Challenge series is positioned for application-specific exhaust repair where factory-style fit and function are required.
| Year | Make | Model | Bed Length | Liters | Cylinders | Notes |
|---|---|---|---|---|---|---|
| 2001 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 2000 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; from 01-20-00 |
| 2000 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; through 01-20-00 |
| 2000 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1999 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1999 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1998 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1998 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1997 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1997 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1996 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1996 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1992 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1992 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1992 | Jeep | Comanche | 6' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1992 | Jeep | Comanche | 7' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1991 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1991 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1991 | Jeep | Comanche | 6' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1991 | Jeep | Comanche | 7' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1990 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1990 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1990 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1990 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1990 | Jeep | Comanche | 7' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1990 | Jeep | Comanche | 6' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1990 | Jeep | Comanche | 6' 0" Foot Bed | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1990 | Jeep | Comanche | 7' 0" Foot Bed | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1990 | Jeep | Wagoneer | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet. |
| 1990 | Jeep | Wagoneer | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1989 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1989 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1989 | Jeep | Comanche | 6' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1989 | Jeep | Comanche | 7' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1989 | Jeep | Comanche | 7' 0" Foot Bed | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1989 | Jeep | Comanche | 6' 0" Foot Bed | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1989 | Jeep | Wagoneer | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1988 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1988 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1988 | Jeep | Comanche | 6' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1988 | Jeep | Comanche | 7' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1988 | Jeep | Comanche | 7' 0" Foot Bed | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1988 | Jeep | Comanche | 6' 0" Foot Bed | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1988 | Jeep | Wagoneer | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1987 | Jeep | Cherokee | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1987 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1987 | Jeep | Comanche | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1987 | Jeep | Comanche | 7' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1987 | Jeep | Comanche | 6' 0" Foot Bed | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1987 | Jeep | Wagoneer | — | 4.0L | L6 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1987 | Jeep | Wagoneer | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1986 | Jeep | Cherokee | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| 1986 | Jeep | Comanche | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with offset nipple as inlet.; with Converter |
| 1986 | Jeep | Wagoneer | — | 2.5L | L4 | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Use end with center nipple as inlet.; with Converter |
| No rows match your filter. | ||||||