/live/media/AP/AP_3256_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3256 Exhaust Muffler
| Brand | AP Exhaust 3256 |
|---|---|
| Body Diameter | 7 |
| Body Length | 25.5 |
| Body Material | Aluminized steel |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2.5 |
| Inlet Location | Center upper |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | 120° l |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2.25 |
| Outlet Location | Left lower |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 29.5 |
| Series | Challenge |
| Shape | Round |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Ford · 143 vehicles |
OE-comparable sound. Baffled muffler design for a controlled exhaust tone.
Aluminized steel body. Built for replacement exhaust service with corrosion resistance.
Challenge series. AP Exhaust product line for OE-style muffler replacement.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 3256 is a round exhaust muffler from the Challenge series, built for Ford Econoline van applications that use a 2.5-inch inlet and 2.25-inch outlet. It is an OE-comparable muffler with a baffled design and aluminized steel construction for service in replacement exhaust systems.
Fits 1987-1996 Ford E-150 Econoline, N/A. Fits 1987-1996 Ford E-150 Econoline Club Wagon, N/A. Fits 1987-1996 Ford E-250 Econoline, N/A. Fits 1987-1996 Ford E-350 Econoline, N/A. Fits 1987-1996 Ford E-350 Econoline Club Wagon, N/A.
Key Features
- AP Exhaust 3256 muffler for replacement exhaust service
- Challenge series design with OE-comparable sound level
- Baffled internal construction for controlled exhaust flow
- Aluminized steel body for corrosion resistance in exhaust use
- Round body with center upper inlet and left lower outlet
- 2.5-inch inlet and 2.25-inch outlet pipe connections
Detailed Description
The AP Exhaust 3256 is a direct replacement-style exhaust muffler for Ford Econoline and Econoline Club Wagon vans listed in the fitment data. Its Challenge series layout uses a baffled internal design and a round aluminized steel body to match common OE-style exhaust service requirements while maintaining an OE-comparable sound level. The center upper inlet and left lower outlet configuration supports the factory-style routing used on these applications. This part number, 3256, is a practical choice when replacing a worn or noisy muffler on Ford E-150 Econoline, Ford E-250 Econoline, or Ford E-350 Econoline models.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Uses
- Exhaust noise that has increased from internal muffler wear
- Rust-through or case deterioration in the muffler body
- Loss of proper exhaust tone in a replacement system
- Fitment issues when restoring an OE-style exhaust layout
- Replacement needs on Ford Econoline van exhaust systems
Installation Notes
Verify the inlet and outlet sizes, body length, and routing before installation. This muffler is listed for applications with a welded OE system, and the fitment notes indicate that the original heat shield should be removed and reused where applicable. Some listed applications also note converter-equipped and under-8500-lb. G.V.W. configurations, so match the vehicle details carefully before ordering. Part number 3256 should be compared against the existing exhaust layout on the vehicle.
Quality Assurance
AP Exhaust supplies replacement exhaust components for service applications that require OE-style fit and function. The 3256 muffler is built with aluminized steel and a baffled design to support consistent exhaust performance in the specified Ford Econoline fitments.
| Year | Make | Model | Liters | Cylinders | Wheel Base | Notes |
|---|---|---|---|---|---|---|
| 1996 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1996 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1996 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1996 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1996 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1996 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1996 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1996 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1995 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1995 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1995 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1995 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1995 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1995 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1995 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1995 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1994 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1994 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1994 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1994 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1994 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1994 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1994 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1994 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1993 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1993 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1993 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1992 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1992 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; under 8500 lbs. G.V.W. |
| 1992 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1991 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1991 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1991 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1991 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1991 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1991 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1991 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1991 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1991 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1991 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1991 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1991 | Ford | E-250 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1991 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1991 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-150 Econoline | 4.9L | L6 | 124.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; With Converter |
| 1990 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1990 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1990 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1990 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1990 | Ford | E-150 Econoline | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1990 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1990 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1990 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1990 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1990 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1990 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1990 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1990 | Ford | E-250 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1990 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1990 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-150 Econoline | 4.9L | L6 | 124.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; With Converter |
| 1989 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1989 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1989 | Ford | E-150 Econoline | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-150 Econoline | 5.8L | V8 | 124.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1989 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1989 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1989 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1989 | Ford | E-250 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1989 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1989 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-150 Econoline | 4.9L | L6 | 124.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; With Converter |
| 1988 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1988 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1988 | Ford | E-150 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-150 Econoline | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-150 Econoline | 5.8L | V8 | 124.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1988 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-150 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1988 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1988 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1988 | Ford | E-250 Econoline | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-250 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1988 | Ford | E-250 Econoline Club Wagon | 5.8L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter; under 8500 G.V.W. |
| 1988 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-150 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-150 Econoline | 4.9L | L6 | 124.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; With Converter |
| 1987 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1987 | Ford | E-150 Econoline | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-150 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1987 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-250 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-250 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1987 | Ford | E-250 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-350 Econoline | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | E-350 Econoline Club Wagon | 4.9L | L6 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| No rows match your filter. | ||||||