/live/media/AP/AP_3257_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3257 Exhaust Muffler
| Brand | AP Exhaust 3257 |
|---|---|
| Body Diameter | 7 |
| Body Length | 24 |
| Body Material | Aluminized steel |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2.25 |
| Inlet Location | Center upper |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | 120° r/120° l |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2 |
| Outlet Location | Left lower / right lower |
| Outlet Quantity | 2 |
| Outlet Type | Pipes |
| Overall Length | 28 |
| Series | Challenge |
| Shape | Round |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Ford · 51 vehicles |
Challenge series. Service replacement muffler with a straightforward, non-tunable design.
Baffled construction. Helps maintain OE-comparable exhaust sound for factory-style operation.
Aluminized steel body. Built for exhaust service with corrosion-resistant material construction.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 3257 is a Challenge series exhaust muffler built for select Ford truck and SUV applications. It uses a baffled, round aluminized steel body with OE-comparable sound output and a dual-outlet layout for direct replacement service.
Compatible With Ford F-150, Ford F-250, and Ford Bronco applications listed below, this muffler matches the original system style used on vehicles with welded exhaust assemblies. AP Exhaust 3257 is a practical choice when replacing a worn muffler on an older Ford exhaust system.
Key Features
- Challenge series exhaust muffler for service replacement use
- Baffled internal design with OE-comparable sound level
- Aluminized steel body for corrosion resistance in exhaust service
- Round housing with center upper inlet and dual lower outlets
- Pipe-style inlet and outlet connections for exhaust system integration
- Part number 3257 for identification and ordering
Detailed Description
This AP Exhaust muffler is engineered with a 7-inch body diameter, 24-inch body length, and 28-inch overall length. The 2.25-inch inlet feeds into a baffled muffler configuration, while the dual 2-inch outlets exit at the left lower and right lower positions. The OE-comparable sound level keeps the exhaust note close to factory behavior without adding tuning complexity, and the non-tunable design keeps the unit straightforward for replacement work. AP Exhaust 3257 is listed for 1984-1996 Ford Bronco, 1987-1996 Ford F-150, and 1987-1993 Ford F-250 applications, including notes for welded OE systems and heat shield reuse where specified. This part number 3257 is the correct reference when matching the muffler to the listed Ford fitments.
Common Uses
- Replacing a rusted or damaged muffler on a Ford F-150 exhaust system
- Restoring exhaust flow after internal muffler failure
- Addressing excessive exhaust noise from a worn muffler
- Servicing Ford F-250 and Ford Bronco exhaust systems with welded OE layouts
Installation Notes
Fitment notes call for reuse of the OE heat shield on applicable vehicles. Several applications reference a welded original system, so replacement planning should account for the existing exhaust layout and any parts noted in the fitment comments. Verify inlet and outlet orientation, body length, and system configuration before installation. AP Exhaust 3257 should be matched to the listed Ford F-150, Ford F-250, and Ford Bronco applications by year and notes.
Quality Assurance
AP Exhaust supplies replacement exhaust components for service applications, and this muffler is built with aluminized steel construction and OE-comparable sound characteristics for the listed fitments. Part number 3257 is used to identify the correct Challenge series muffler for the specified Ford applications.
| Year | Make | Model | Liters | Cylinders | Wheel Base | Notes |
|---|---|---|---|---|---|---|
| 1996 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1996 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1995 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1995 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1994 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1994 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | F-150 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | F-150 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1993 | Ford | F-250 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; (To 8500 lbs. G.V.W.) |
| 1993 | Ford | F-250 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | F-150 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | F-150 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1992 | Ford | F-250 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; (To 8500 lbs. G.V.W.) |
| 1992 | Ford | F-250 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | F-150 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | F-150 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1991 | Ford | F-250 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; (To 8500 lbs. G.V.W.) |
| 1991 | Ford | F-250 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | F-150 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | F-150 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1990 | Ford | F-250 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; (To 8500 lbs. G.V.W.) |
| 1990 | Ford | F-250 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | F-150 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | F-150 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1989 | Ford | F-250 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; (To 8500 lbs. G.V.W.) |
| 1989 | Ford | F-250 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | F-150 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | F-150 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1988 | Ford | F-250 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; (To 8500 lbs. G.V.W.) |
| 1988 | Ford | F-250 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | F-150 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | F-150 | 5.8L | V8 | 117.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | F-150 | 5.8L | V8 | 139.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | F-150 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1987 | Ford | F-250 | 5.8L | V8 | 155.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; (To 8500 lbs. G.V.W.) |
| 1987 | Ford | F-250 | 5.8L | V8 | 133.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield. |
| 1986 | Ford | Bronco | 5.8L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1985 | Ford | Bronco | 5.8L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1984 | Ford | Bronco | 5.8L | V8 | — | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| No rows match your filter. | ||||||