/live/media/AP/AP_3539_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3539 Exhaust Muffler
| Brand | AP Exhaust 3539 |
|---|---|
| Body Height | 4.06 |
| Body Length | 20 |
| Body Material | Aluminized steel |
| Body Width | 10.5 |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2.25 |
| Inlet Location | Right center |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | O/c |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2 |
| Outlet Location | Center |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 24 |
| Series | Challenge |
| Shape | Oval |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Chevrolet and GMC · 18 vehicles |
OE-comparable sound. Keeps the exhaust note close to factory levels for replacement service.
Baffled design. Helps control exhaust flow in a regular-grade muffler layout.
Aluminized steel. Provides durable construction for everyday exhaust replacement use.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Exhaust Muffler Overview
AP Exhaust 3539 is a Challenge series exhaust muffler built for OE-comparable sound and direct replacement service. It is shaped for a factory-style exhaust layout and uses aluminized steel construction for everyday corrosion resistance.
Key Features
- Challenge series muffler with an OE-comparable sound level
- Oval, baffled design for controlled exhaust flow
- Aluminized steel body for durability in exhaust service
- Single 2.25-inch inlet and single 2-inch outlet
- Right-center inlet and center outlet layout
- AP Exhaust 3539 for factory-style exhaust replacement
Detailed Description
This AP Exhaust muffler is designed around a regular-grade, oval, baffled construction with a 20-inch body length and 24-inch overall length. The inlet and outlet pipe sizing, along with the right-center inlet and center outlet arrangement, make it a practical choice for exhaust repair work where the original routing must be maintained. AP Exhaust 3539 is listed for 1992-1994 Chevrolet S10 and 1992-1994 GMC Sonoma applications, including Challenge LTW systems noted as welded OE assemblies.
The Challenge line focuses on replacement mufflers that match factory-style sound characteristics without changing the basic exhaust layout. For Chevrolet S10 and GMC Sonoma owners, AP Exhaust 3539 provides a direct-fit muffler option for restoring a worn or damaged exhaust section while keeping the system configuration close to original.
What It Is Used For
- Replacing a rusted or damaged exhaust muffler
- Restoring OE-comparable exhaust sound
- Repairing a factory-style exhaust system with welded sections
- Maintaining the original exhaust routing on listed applications
- Addressing exhaust noise from a failing muffler body or internal baffles
Installation Notes and Tips
Verify inlet and outlet diameters, body length, and pipe location before installation. The listed fitment notes indicate the OE system was a welded assembly, so replacement planning should account for the existing exhaust configuration on the vehicle. Confirm the exhaust path on the Chevrolet S10 or GMC Sonoma before final installation.
Quality Assurance
AP Exhaust 3539 is part of the Challenge series and is built with aluminized steel and a baffled internal design for replacement use in factory-style exhaust systems.
| Year | Make | Model | Drive Type | Liters | Cylinders | Wheel Base | Notes |
|---|---|---|---|---|---|---|---|
| 1994 | Chevrolet | S10 | RWD | 2.2L | L4 | 118.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1994 | Chevrolet | S10 | RWD | 2.2L | L4 | 122.9" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1994 | Chevrolet | S10 | RWD | 2.2L | L4 | 108.4" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1994 | GMC | Sonoma | RWD | 2.2L | L4 | 123.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1994 | GMC | Sonoma | RWD | 2.2L | L4 | 118.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1994 | GMC | Sonoma | RWD | 2.2L | L4 | 108.4" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1993 | Chevrolet | S10 | RWD | 2.5L | L4 | 118.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1993 | Chevrolet | S10 | RWD | 2.5L | L4 | 122.9" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1993 | Chevrolet | S10 | RWD | 2.5L | L4 | 108.4" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1993 | GMC | Sonoma | RWD | 2.5L | L4 | 123.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1993 | GMC | Sonoma | RWD | 2.5L | L4 | 118.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1993 | GMC | Sonoma | RWD | 2.5L | L4 | 108.4" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1992 | Chevrolet | S10 | RWD | 2.5L | L4 | 122.9" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1992 | Chevrolet | S10 | RWD | 2.5L | L4 | 118.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1992 | Chevrolet | S10 | RWD | 2.5L | L4 | 108.4" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1992 | GMC | Sonoma | RWD | 2.5L | L4 | 118.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1992 | GMC | Sonoma | RWD | 2.5L | L4 | 123.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 1992 | GMC | Sonoma | RWD | 2.5L | L4 | 108.4" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| No rows match your filter. | |||||||