/live/media/AP/AP_3578_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 3578 Exhaust Muffler
| Brand | AP Exhaust 3578 |
|---|---|
| Body Diameter | 7 |
| Body Length | 24 |
| Body Material | Aluminized steel |
| Grade Type | Regular |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2.5 |
| Inlet Location | Center upper |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Muffler Configuration | 120° l |
| Muffler Type | Baffled |
| Outlet Inside Diameter | 2.25 |
| Outlet Location | Left lower |
| Outlet Quantity | 1 |
| Outlet Type | Pipe |
| Overall Length | 28 |
| Series | Challenge |
| Shape | Round |
| Sound Level | Oe comparable |
| Tunable | No |
| Fits | Ford · 10 vehicles |
OE-comparable sound. Baffled muffler design helps maintain a familiar exhaust note.
Aluminized steel body. Built for everyday exhaust service with corrosion-resistant construction.
Challenge series. AP Exhaust 3578 is part of a regular-grade replacement line.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Exhaust Muffler Overview
AP Exhaust 3578 is a round exhaust muffler from the Challenge series, built for direct replacement applications that call for a 2.5-inch inlet and a 2.25-inch outlet. It uses a baffled design and aluminized steel construction to match common OE-style exhaust layouts.
Key Features
- Aluminized steel body for corrosion resistance in everyday exhaust service.
- Baffled muffler design for OE-comparable sound control.
- Round 7-inch body with 24-inch body length and 28-inch overall length.
- Center upper inlet and left lower outlet for specific exhaust routing.
- AP Exhaust 3578 from the Challenge series.
Fitment Details
Compatible with 1992-1996 Ford E-150 Econoline and 1992-1996 Ford E-150 Econoline Club Wagon. Fitment notes indicate the OE system was a welded assembly, the original heat shield should be removed and reused, and the application is with converter. AP Exhaust 3578 is a fitment-specific muffler for these Ford E-150 Econoline applications.
Common Replacement Uses
- Restoring exhaust flow when the original muffler is rusted or damaged.
- Replacing a worn muffler that has developed excessive exhaust noise.
- Addressing fitment needs on welded OE exhaust assemblies.
- Matching a muffler layout with center upper inlet and left lower outlet routing.
Installation Notes
Review the vehicle-specific notes before installation. This muffler is listed for applications where the OE system was welded, so cutting and exhaust fabrication may be required during service. Reuse the original heat shield where specified, and verify inlet and outlet alignment before final welding or clamping.
Quality Assurance
AP Exhaust 3578 is part of the Challenge series and is built as a regular-grade replacement muffler for OE-style exhaust service.
| Year | Make | Model | Liters | Cylinders | Wheel Base | Notes |
|---|---|---|---|---|---|---|
| 1996 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1996 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1995 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1995 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1994 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1994 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1993 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1993 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1992 | Ford | E-150 Econoline | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| 1992 | Ford | E-150 Econoline Club Wagon | 5.0L | V8 | 138.0" | Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Remove and re-use O.E. heat shield.; with Converter |
| No rows match your filter. | ||||||