/live/media/AP/AP_54909_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 54909 Exhaust Tail Pipe
| Brand | AP Exhaust 54909 |
|---|---|
| Material | Aluminized steel |
| Original Equipment Replacement | Yes |
| Fits | Chevrolet and GMC · 32 vehicles |
OE replacement. Built as a direct replacement for the original exhaust tail pipe layout.
Aluminized steel. A practical material choice for exhaust service and corrosion resistance.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Product Overview
AP Exhaust 54909 is an original equipment replacement exhaust tail pipe made from aluminized steel. It is built for specific Chevrolet and GMC Suburban applications from 1994-1995 and follows the OE-style exhaust layout used on those vehicles.
This tail pipe is a fitment-based replacement for Chevrolet C1500 Suburban, Chevrolet C2500 Suburban, Chevrolet K1500 Suburban, Chevrolet K2500 Suburban, GMC C1500 Suburban, GMC C2500 Suburban, GMC K1500 Suburban, and GMC K2500 Suburban applications. The part number 54909 is listed for systems with either a 2 3/4-inch or 3-inch muffler inlet, depending on the vehicle configuration.
Key Features
- Aluminized steel construction for exhaust system service.
- Original equipment replacement design for OE-style fitment.
- Application-specific tail pipe for selected Suburban exhaust systems.
- Available for multiple inlet configurations noted in the fitment data.
Detailed Description
AP Exhaust 54909 is intended for owners replacing a tail pipe on 1994-1995 Chevrolet and GMC Suburban models. The fitment data shows coverage for C1500, C2500, K1500, and K2500 Suburban applications, with notes for welded OE systems and specific muffler inlet sizes. If you are sourcing a replacement for a Chevrolet C1500 Suburban or GMC K2500 Suburban exhaust system, confirm the inlet size and vehicle notes before ordering.
The aluminized steel construction provides a practical material choice for exhaust service, while the OE replacement designation supports direct replacement planning for the original exhaust layout. Part number 54909 is also referenced for the same application under cross-reference listings from Monroe Shocks & Struts.
Common Replacement Uses
- Corroded or damaged tail pipe sections.
- Exhaust leaks caused by rust-through or seam failure.
- Replacement after damage to a welded OE exhaust assembly.
- Restoring proper exhaust routing on Suburban exhaust systems.
Installation Notes
Review the fitment notes carefully before installation. The OE system was a welded assembly, and the catalog recommends replacing all noted parts together. Verify the muffler inlet size and the vehicle's gross vehicle weight rating where listed, especially on Chevrolet and GMC C2500 and K2500 Suburban applications.
Because fitment varies by inlet size and chassis configuration, compare the existing exhaust layout to the catalog notes before beginning the job. This helps ensure the correct AP Exhaust 54909 tail pipe is selected for the vehicle.
Quality Assurance
AP Exhaust identifies this part as an original equipment replacement, which supports OE-style application matching for the listed Chevrolet and GMC Suburban models. The part number 54909 is cataloged for specific fitment combinations rather than universal use.
| Year | Make | Model | Liters | Cylinders | Notes |
|---|---|---|---|---|---|
| 1995 | Chevrolet | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler Inlet |
| 1995 | Chevrolet | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1995 | Chevrolet | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 Ibs. G.V.W.; w/3" Muffler Inlet |
| 1995 | Chevrolet | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 lbs. G.V.W.; with 2 3/4" Muffler Inlet |
| 1995 | Chevrolet | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1995 | Chevrolet | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler inlet |
| 1995 | Chevrolet | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 Ibs. G.V.W.); with 3" Muffler Inlet |
| 1995 | Chevrolet | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 lbs. G.V.W.); with 2 3/4" Muffler Inlet |
| 1995 | GMC | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler Inlet |
| 1995 | GMC | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1995 | GMC | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 Ibs. G.V.W.; w/3" Muffler Inlet |
| 1995 | GMC | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 lbs. G.V.W.; with 2 3/4" Muffler Inlet |
| 1995 | GMC | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1995 | GMC | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler inlet |
| 1995 | GMC | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 Ibs. G.V.W.); with 3" Muffler Inlet |
| 1995 | GMC | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 lbs. G.V.W.); with 2 3/4" Muffler Inlet |
| 1994 | Chevrolet | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler Inlet |
| 1994 | Chevrolet | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1994 | Chevrolet | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 Ibs. G.V.W.; w/3" Muffler Inlet |
| 1994 | Chevrolet | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 lbs. G.V.W.; with 2 3/4" Muffler Inlet |
| 1994 | Chevrolet | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1994 | Chevrolet | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler inlet |
| 1994 | Chevrolet | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 Ibs. G.V.W.); with 3" Muffler Inlet |
| 1994 | Chevrolet | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 lbs. G.V.W.); with 2 3/4" Muffler Inlet |
| 1994 | GMC | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler Inlet |
| 1994 | GMC | C1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1994 | GMC | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 Ibs. G.V.W.; w/3" Muffler Inlet |
| 1994 | GMC | C2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; under 8600 lbs. G.V.W.; with 2 3/4" Muffler Inlet |
| 1994 | GMC | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 2 3/4" Muffler Inlet |
| 1994 | GMC | K1500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; with 3" Muffler inlet |
| 1994 | GMC | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 Ibs. G.V.W.); with 3" Muffler Inlet |
| 1994 | GMC | K2500 Suburban | 5.7L | V8 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; (To 8500 lbs. G.V.W.); with 2 3/4" Muffler Inlet |
| No rows match your filter. | |||||