/live/media/AP/AP_642892_Top.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 642892 Catalytic Converter - Rear
| Brand | AP Exhaust 642892 |
|---|---|
| Position | Rear |
| Body Material | Stainless steel |
| Inlet Gasket | Yes |
| Inlet Hardware | Yes |
| Inlet Type A | 2 bolt welded flange |
| O2 Sensor Ports | None |
| Outlet Gasket | Not required |
| Outlet Hardware | Yes |
| Outlet Type A | 2.03" od pipe |
| Overall Length (IN) | 22 |
| Substrate Material | Ceramic |
| Type | Federal / epa direct-fit |
| Fits | Toyota · 7 vehicles |
Direct-fit design. Built to OE dimensions for accurate exhaust alignment and installation.
Ceramic substrate. Supports efficient converter performance with a stainless steel body.
ARISTO chemistry. AP Exhaust uses advanced substrate technology for consistent converter loading.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust catalytic converter part number 642892 is a Federal / EPA direct-fit replacement built to OE dimensions for a precise installation. It is engineered for the rear exhaust position on select Toyota Highlander applications and uses a ceramic substrate with a stainless steel body for dependable emissions control.
This converter is built with AP Exhaust’s ARISTO substrate chemistry and advanced manufacturing methods to support efficient converter performance and consistent fitment. For Toyota Highlander owners needing a direct-fit rear catalytic converter, part number 642892 provides a vehicle-specific solution.
Key Features
- Federal / EPA direct-fit catalytic converter
- Stainless steel body construction
- Ceramic substrate material
- 2-bolt welded flange inlet design
- 2.03-inch OD pipe outlet
- O2 sensor ports not included
- Built to OE dimensions for fitment accuracy
Detailed Description
AP Exhaust 642892 is designed for the rear exhaust location on 2004-2007 Toyota Highlander models, with fitment also listed for 2004-2006 Toyota Highlander rear applications. The direct-fit design follows OE dimensions, which helps maintain proper exhaust routing and installation alignment on the Toyota Highlander platform. The stainless steel body and ceramic substrate support emissions system function while the inlet and outlet configuration matches the specified application.
AP Emissions Technologies uses ARISTO substrate chemistry and automated manufacturing processes to produce converters with consistent dimensions and fitment. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Is Used For
- Replacing a worn or inefficient rear catalytic converter
- Restoring exhaust emissions system function
- Addressing converter-related check engine light concerns
- Correcting exhaust fitment issues on direct-fit applications
- Replacing a welded OE assembly with a vehicle-specific unit
Installation Notes and Tips
Fits 2004-2007 Toyota Highlander, rear. Fitment notes indicate the OE system may require cutting behind the rear converter weld on some applications, and one listed application requires welded assembly 7505 to complete installation because the original system was a welded assembly. Verify emissions requirements before installation, as the fitment notes include federal and California emissions references and state restrictions.
Quality Assurance
AP Exhaust builds this converter to OE dimensions using automated workstations, spinner welding equipment, and high-speed production lines for consistent manufacturing control. The ARISTO substrate chemistry is used to support efficient converter loading and performance consistency.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2007 | Toyota | Highlander | 2.4L | L4 | Rear | Direct Fit; Requires Welded Assembly 7505 to complete installation as OE is complete welded assembly; Federal and California Emissions. Not For Sale or Use on vehicles licensed in the state of CA, CO, ME & NY. Restrictions may apply in other states. Check with your state authority for details. |
| 2006 | Toyota | Highlander | 2.4L | L4 | Rear | Direct Fit; (04-06); Federal and California Emissions. Not For Sale or Use on vehicles licensed in the state of CA, CO, ME & NY. Restrictions may apply in other states. Check with your state authority for details.; The O.E. system must be cut off 7-1/2" behind the rear converter weld.; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 2006 | Toyota | Highlander | 2.4L | L4 | Rear | Direct Fit; Requires Welded Assembly 7505 to complete installation as OE is complete welded assembly; Federal and California Emissions. Not For Sale or Use on vehicles licensed in the state of CA, CO, ME & NY. Restrictions may apply in other states. Check with your state authority for details. |
| 2005 | Toyota | Highlander | 2.4L | L4 | Rear | Direct Fit; (04-06); Federal and California Emissions. Not For Sale or Use on vehicles licensed in the state of CA, CO, ME & NY. Restrictions may apply in other states. Check with your state authority for details.; The O.E. system must be cut off 7-1/2" behind the rear converter weld.; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 2005 | Toyota | Highlander | 2.4L | L4 | Rear | Direct Fit; Requires Welded Assembly 7505 to complete installation as OE is complete welded assembly; Federal and California Emissions. Not For Sale or Use on vehicles licensed in the state of CA, CO, ME & NY. Restrictions may apply in other states. Check with your state authority for details. |
| 2004 | Toyota | Highlander | 2.4L | L4 | Rear | Direct Fit; (04-06); Federal and California Emissions. Not For Sale or Use on vehicles licensed in the state of CA, CO, ME & NY. Restrictions may apply in other states. Check with your state authority for details.; The O.E. system must be cut off 7-1/2" behind the rear converter weld.; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. |
| 2004 | Toyota | Highlander | 2.4L | L4 | Rear | Direct Fit; Requires Welded Assembly 7505 to complete installation as OE is complete welded assembly; Federal and California Emissions. Not For Sale or Use on vehicles licensed in the state of CA, CO, ME & NY. Restrictions may apply in other states. Check with your state authority for details. |
| No rows match your filter. | ||||||