/live/media/AP/AP_64755_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 64755 Exhaust Tail Pipe - Right
| Brand | AP Exhaust 64755 |
|---|---|
| Position | Right |
| Material | Aluminized steel |
| Original Equipment Replacement | Yes |
| Fits | Ford, Lincoln, and Mercury · 40 vehicles |
OE replacement. Original equipment replacement design for service on listed exhaust applications.
Aluminized steel. Material choice helps resist corrosion in exhaust service.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Exhaust Tail Pipe Overview
AP Exhaust part 64755 is an original equipment replacement exhaust tail pipe made from aluminized steel. It is built for select Ford, Lincoln, and Mercury full-size sedans with single or dual exhaust configurations, including applications where the OE system used a welded assembly.
Key Features
- Aluminized steel construction for corrosion resistance in exhaust service.
- Original equipment replacement design for direct service use.
- Application-specific fitment for select Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis models.
- Supports both single exhaust and dual exhaust applications where listed.
- Part number 64755 for easy identification during ordering and service lookup.
Detailed Fitment and Design
This AP Exhaust tail pipe is engineered for vehicles that require a replacement exhaust section matched to the original system layout. In dual exhaust applications, the notes identify a resonator eliminator pipe configuration, while several fitments also note welded OE assemblies that should be serviced according to the vehicle-specific replacement guidance. AP Exhaust 64755 is a practical choice for restoring exhaust routing on compatible Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis models.
What It Helps Address
- Rust or corrosion in the tail pipe section.
- Damage from road debris or impact.
- Exhaust leaks caused by deterioration in the original pipe.
- Fitment issues when replacing a welded OE exhaust section.
- Noise or flow problems related to a worn tail pipe.
Installation Notes and Tips
Verify the exhaust configuration before ordering, since fitment differs between single exhaust and dual exhaust applications. Review the notes for welded-system replacement guidance and resonator eliminator pipe references where applicable. Confirm the vehicle year, make, model, and exhaust layout against the fitment table before installation. Part number 64755 should be matched to the exact application listed for the vehicle.
Quality Assurance
AP Exhaust supplies replacement exhaust components for service applications, and this part is specified as an original equipment replacement. The aluminized steel construction supports long-term exhaust service in the listed applications.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1997 | Ford | Crown Victoria | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Single Exhaust |
| 1997 | Ford | Crown Victoria | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1997 | Lincoln | Town Car | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Single Exhaust |
| 1997 | Lincoln | Town Car | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1997 | Mercury | Grand Marquis | 4.6L | V8 | N/A | Single Exhaust |
| 1997 | Mercury | Grand Marquis | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1996 | Ford | Crown Victoria | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Single Exhaust |
| 1996 | Ford | Crown Victoria | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1996 | Lincoln | Town Car | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Single Exhaust |
| 1996 | Lincoln | Town Car | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1996 | Mercury | Grand Marquis | 4.6L | V8 | N/A | Single Exhaust |
| 1996 | Mercury | Grand Marquis | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1995 | Ford | Crown Victoria | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Single Exhaust |
| 1995 | Ford | Crown Victoria | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1995 | Lincoln | Town Car | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Single Exhaust |
| 1995 | Lincoln | Town Car | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1995 | Mercury | Grand Marquis | 4.6L | V8 | N/A | Single Exhaust |
| 1995 | Mercury | Grand Marquis | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Dual Exhaust |
| 1994 | Ford | Crown Victoria | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1994 | Ford | Crown Victoria | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1994 | Lincoln | Town Car | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1994 | Lincoln | Town Car | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1994 | Mercury | Grand Marquis | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1994 | Mercury | Grand Marquis | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1993 | Ford | Crown Victoria | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1993 | Ford | Crown Victoria | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1993 | Lincoln | Town Car | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1993 | Lincoln | Town Car | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1993 | Mercury | Grand Marquis | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1993 | Mercury | Grand Marquis | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1992 | Ford | Crown Victoria | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1992 | Ford | Crown Victoria | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1992 | Lincoln | Town Car | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1992 | Lincoln | Town Car | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1992 | Mercury | Grand Marquis | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1992 | Mercury | Grand Marquis | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1991 | Lincoln | Town Car | 4.6L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1991 | Lincoln | Town Car | 4.6L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust |
| 1990 | Lincoln | Town Car | 5.0L | V8 | Right | (Resonator Eliminator Pipe); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Dual Exhaust |
| 1990 | Lincoln | Town Car | 5.0L | V8 | N/A | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Muffler and tailpipe sets must be replaced as a set. Individual components will not interchange.; Single Exhaust; |
| No rows match your filter. | ||||||