/live/media/AP/AP_68313_Generic.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 68313 Exhaust Pipe - Center or Rear
| Brand | AP Exhaust 68313 |
|---|---|
| Position | Rear and Center |
| Material | Aluminized steel |
| Original Equipment Replacement | Yes |
| Fits | Buick, Chevrolet, Oldsmobile, and Pontiac · 45 vehicles |
OE replacement. Built as a direct replacement for factory-style exhaust service.
Aluminized steel. Helps resist corrosion in demanding exhaust environments.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Exhaust Pipe for GM A-Body Applications
AP Exhaust 68313 is an original equipment replacement exhaust pipe made for select Buick, Chevrolet, Oldsmobile, and Pontiac applications. Built from aluminized steel, it is specified for rear and center exhaust routing where the factory system used welded construction.
Key Features
- Aluminized steel construction for corrosion resistance in exhaust service.
- Original equipment replacement design for factory-style service.
- Application-specific fitment for rear and center exhaust positions.
- Supports single and dual exhaust configurations where listed in fitment.
- AP Exhaust 68313 for direct replacement service on select GM platforms.
Detailed Description
This exhaust pipe is engineered for 1988-1992 Buick Regal, 1990-1992 Chevrolet Lumina, 1988-1992 Oldsmobile Cutlass Supreme, and 1988-1992 Pontiac Grand Prix applications listed in the fitment data. AP Exhaust 68313 is intended for vehicles that used a welded OE exhaust assembly, and the fitment notes call for cutting the original extension pipe at the specified location before installation. For buyers searching for a Buick Regal exhaust pipe, Chevrolet Lumina exhaust pipe, or Pontiac Grand Prix exhaust pipe, this part provides a direct replacement path for the listed configurations.
What It Is Used For
- Replacing a damaged or rusted exhaust pipe section.
- Restoring factory exhaust routing after corrosion or impact damage.
- Addressing leaks at a welded exhaust connection.
- Matching OE-style exhaust layout on listed GM models.
- Servicing rear or center exhaust applications noted in the fitment.
Installation Notes and Tips
Verify the exact year, model, exhaust position, and notes before ordering. The fitment data specifies welded OE systems and, on many applications, requires cutting the original extension pipe 1 1/2 inches behind the pipe-to-converter weld. Review the notes for single exhaust, dual exhaust, sport exhaust, and exception details before installation. AP Exhaust 68313 should be matched to the exact configuration shown for your vehicle.
Quality Assurance
AP Exhaust identifies this part as an original equipment replacement, and the aluminized steel construction supports long-term exhaust service in the specified applications. Part number 68313 is listed for direct-fit replacement use on the vehicles shown in the fitment data.
| Year | Make | Model | Submodel | Body Type | # Doors | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 1992 | Buick | Regal | — | — | — | 3.1L | V6 | Rear | (88-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1992 | Chevrolet | Lumina | — | Sedan | 4 Door | 2.5L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1992 | Chevrolet | Lumina | — | Coupe | 2 Door | 2.5L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1992 | Chevrolet | Lumina | — | Sedan | 4 Door | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1992 | Chevrolet | Lumina | — | Coupe | 2 Door | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1992 | Oldsmobile | Cutlass Supreme | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Single Exhaust |
| 1992 | Pontiac | Grand Prix | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Single Exhaust |
| 1991 | Buick | Regal | — | — | — | 3.1L | V6 | Rear | (88-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1991 | Chevrolet | Lumina | — | Sedan | 4 Door | 2.5L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1991 | Chevrolet | Lumina | — | Coupe | 2 Door | 2.5L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1991 | Chevrolet | Lumina | — | Coupe | 2 Door | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1991 | Chevrolet | Lumina | — | Sedan | 4 Door | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1991 | Oldsmobile | Cutlass Supreme | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Single Exhaust |
| 1991 | Oldsmobile | Cutlass Supreme | — | — | — | 2.3L | L4 | Rear | The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1991 | Pontiac | Grand Prix | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1991 | Pontiac | Grand Prix | — | — | — | 2.3L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Buick | Regal | — | — | — | 3.1L | V6 | Rear | (88-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Chevrolet | Lumina | — | Sedan | 4 Door | 2.5L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Chevrolet | Lumina | — | Coupe | 2 Door | 2.5L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Chevrolet | Lumina | — | Coupe | 2 Door | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Chevrolet | Lumina | — | Sedan | 4 Door | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Oldsmobile | Cutlass Supreme | — | — | — | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; with Sport Exhaust |
| 1990 | Oldsmobile | Cutlass Supreme | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Sport Exhaust |
| 1990 | Oldsmobile | Cutlass Supreme | — | — | — | 2.3L | L4 | Rear | The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Pontiac | Grand Prix | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1990 | Pontiac | Grand Prix | SE | — | — | 3.1L | V6 | Center | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Dual Exhaust; (1st Design) |
| 1990 | Pontiac | Grand Prix | STE | — | — | 3.1L | V6 | Center | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Dual Exhaust; (1st Design) |
| 1990 | Pontiac | Grand Prix | — | — | — | 2.3L | L4 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1989 | Buick | Regal | — | — | — | 3.1L | V6 | Rear | (88-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1989 | Buick | Regal | — | — | — | 2.8L | V6 | Rear | (88-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1989 | Oldsmobile | Cutlass Supreme | — | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Sport Exhaust |
| 1989 | Oldsmobile | Cutlass Supreme | — | — | — | 3.1L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; with Sport Exhaust |
| 1989 | Oldsmobile | Cutlass Supreme | — | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; with Sport Exhaust |
| 1989 | Oldsmobile | Cutlass Supreme | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Sport Exhaust |
| 1989 | Pontiac | Grand Prix | Base | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Dual Exhaust |
| 1989 | Pontiac | Grand Prix | LE | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Dual Exhaust |
| 1989 | Pontiac | Grand Prix | SE | — | — | 2.8L | V6 | Center | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Dual Exhaust |
| 1989 | Pontiac | Grand Prix | — | — | — | 3.1L | V6 | Rear | (89-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1989 | Pontiac | Grand Prix | SE | — | — | 3.1L | V6 | Center | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Dual Exhaust; (1st Design) |
| 1988 | Buick | Regal | — | — | — | 2.8L | V6 | Rear | (88-92); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld. |
| 1988 | Oldsmobile | Cutlass Supreme | — | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Sport Exhaust |
| 1988 | Oldsmobile | Cutlass Supreme | — | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; with Sport Exhaust |
| 1988 | Pontiac | Grand Prix | Base | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Dual Exhaust |
| 1988 | Pontiac | Grand Prix | LE | — | — | 2.8L | V6 | Rear | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; except Dual Exhaust |
| 1988 | Pontiac | Grand Prix | SE | — | — | 2.8L | V6 | Center | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. extension pipe must be cut off 1 1/2" behind the pipe to converter weld.; Dual Exhaust |
| No rows match your filter. | |||||||||