/live/media/AP/AP_88162_Top.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
AP Exhaust 88162 Exhaust Pipe
| Brand | AP Exhaust 88162 |
|---|---|
| Bend Type | Serrated |
| Bolt Hole Quantity | 2 |
| Design | Oe replacement |
| Exhaust Pipe Material | Aluminized steel |
| Flange Bolt Hole Diameter | 0.50 |
| Height | 4.50 |
| Inlet Diameter | 2.40 id |
| Inlet Quantity | 1 |
| Inlet Type | Pipe |
| Length (inches) | 85.00 |
| Outlet Diameter | 2.36 od |
| Outlet Quantity | 1 |
| Outlet Type | Flange |
| Package Material | Uncartonized |
| Resonator | 3.5"round, 12" body |
| Width | 7.88 |
| Fits | Mazda · 8 vehicles |
OE replacement. Matches the original exhaust pipe layout for service repair.
Aluminized steel. Provides a durable exhaust pipe construction for replacement work.
Integrated resonator. Includes a 3.5-inch round, 12-inch body section.
Cross-references PY03-20-55X for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
AP Exhaust 88162 is an OE replacement exhaust pipe for select Mazda 6 applications. It is built with aluminized steel and uses a serrated bend design to match the original exhaust routing and connection style.
This exhaust pipe is listed for Mazda 6 models where the OE system was welded in place, making it a direct replacement option for service work on the exhaust system. The AP Exhaust 88162 part number is also referenced by cross number PY03-20-55X for the same application.
Key Features
- OE replacement exhaust pipe for service repair
- Aluminized steel construction for corrosion resistance
- Serrated bend type for formed exhaust routing
- Single inlet and single outlet configuration
- Flange outlet with two bolt holes
- Integrated resonator section with 3.5-inch round, 12-inch body
Detailed Description
AP Exhaust 88162 is engineered as a replacement exhaust pipe for Mazda 6 vehicles that require service after the original welded exhaust assembly is removed. The pipe measures 85 inches long and uses a 2.40-inch inside diameter inlet with a 2.36-inch outside diameter flange outlet, helping maintain the original exhaust path and connection points. AP Exhaust 88162 is a practical choice for exhaust repair on 2014-2019 Mazda 6 models, including 2018-2019 Mazda 6 applications without cylinder deactivation.
The aluminized steel construction is suited for exhaust system replacement work where fit and material match matter. The included resonator section helps preserve the original exhaust layout, while the OE replacement design supports a service-style installation on the Mazda 6 exhaust system.
What It Is Used For
- Replacing a damaged or rusted exhaust pipe
- Restoring exhaust flow after removal of a welded OE assembly
- Repairing exhaust leaks at the pipe and flange connection
- Returning the exhaust system to original routing and layout
- Servicing Mazda 6 exhaust systems with the correct formed pipe profile
Installation Notes and Tips
Fits 2014-2019 Mazda 6, N/A. Fits 2018-2019 Mazda 6, N/A, without cylinder deactivation. The OE system must be cut off 5-1/2 inches behind the rear converter weld, and the fitment notes recommend replacing all listed related parts during the repair. Verify flange alignment and exhaust routing before final tightening.
Quality Assurance
AP Exhaust 88162 is an OE replacement part built to match the original exhaust system layout for the listed Mazda 6 applications. The part number 88162 is cross-referenced to PY03-20-55X for the same application.
| Year | Make | Model | Liters | Cylinders | Notes |
|---|---|---|---|---|---|
| 2019 | Mazda | 6 | 2.5L | L4 | (Without Cylinder Deactivation); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| 2019 | Mazda | 6 | 2.5L | L4 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| 2018 | Mazda | 6 | 2.5L | L4 | (Without Cylinder Deactivation); OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| 2018 | Mazda | 6 | 2.5L | L4 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| 2017 | Mazda | 6 | 2.5L | L4 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| 2016 | Mazda | 6 | 2.5L | L4 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| 2015 | Mazda | 6 | 2.5L | L4 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| 2014 | Mazda | 6 | 2.5L | L4 | OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; The O.E. system must be cut off 5-1/2" behind the rear converter weld. |
| No rows match your filter. | |||||