Autobest F1075A Fuel Pump and Strainer Set

Fuel Pump and Strainer Set for Ford Trucks

The Autobest F1075A fuel pump and strainer set is built for in-tank fuel delivery on select Ford F-150, F-250, F-250 HD, and F-350 applications. It includes the components needed for a complete installation and is engineered with ethanol-tolerant materials for modern fuel systems.

Autobest’s Fuel Pump and Strainer Set line focuses on quality materials, tested performance, and direct-fit service parts for fuel system repair. The F1075A is a performance-grade, 12V turbine pump with an internal strainer and a sealed in-tank design.

Key Features

• Autobest part number F1075A
• In-tank turbine fuel pump design
• Average flow rating: 135 GPH
• Average current draw: 7A
• Operating pressure range: 7.25 to 21.76 PSI
• 12V negative-ground electrical system
• Internal strainer included
• Gasket/seal included with NBR material
• Housing material: POM
• Built with ethanol-tolerant materials for fuel system use

Detailed Description

The Autobest F1075A is a fuel pump and strainer set for rear-tank Ford truck applications that require an in-tank replacement. It is listed for 1990-1997 Ford F-150, 1990-1997 Ford F-250, 1990-1997 Ford F-350, and 1997 Ford F-250 HD, with fitment notes calling out rear steel tank configurations, fuel reservoir, fuel strainer, and tank seal requirements on the applicable models. This part cross-references Airtex E2064MN and Bosch 67003 for the same application.

With a turbine-style pump, metallic conduit outlet, and internal strainer, the F1075A is intended to restore fuel delivery performance in vehicles that rely on an in-tank pump assembly. The included seal and complete-kit packaging support a cleaner replacement process for Ford F-150, Ford F-250, and Ford F-350 fuel system service.

What It Helps Fix

• Hard starting caused by weak fuel delivery
• Engine hesitation from low fuel pressure
• Fuel starvation under load
• Intermittent stalling related to pump wear
• Poor drivability from a restricted or failing in-tank pump assembly

Installation Notes

Install in the tank only. Verify the vehicle uses the listed rear tank configuration before ordering, especially on 1990-1997 Ford F-150, F-250, and F-350 models. The pump is supplied without a wire harness, fuel filter, fuel sending unit, fuel tank pressure sensor, or regulator. Confirm electrical polarity, outlet routing, and seal placement during installation.

Quality Assurance

Autobest uses top-grade components and tests pumps throughout the manufacturing process to help maintain consistent quality. The F1075A is backed by a limited lifetime warranty.