Autotecnica FD0517372 Fuel Pump and Sender Assembly

Fuel Pump and Sender Assembly for 1999 Ford Ranger

Autotecnica FD0517372 is a specific-fit in-tank fuel pump and sender assembly for the 1999 Ford Ranger. It combines fuel delivery and fuel level sending functions in one unit, with an included strainer, gasket/seal, and wire harness for a direct replacement approach.

Key Features

• Specific-fit fuel pump and sender assembly for the 1999 Ford Ranger
• Electric in-tank design for gasoline applications
• Fuel sending unit included
• 12-volt, negative-ground configuration
• Maximum pressure rating of 58
• Average flow rating of 135 and average current draw of 5.9
• Includes external strainer, wire harness, and NBR gasket/seal
• Round connector with female connector gender and male terminals
• 7-wire, 7-terminal layout with red/black wire colors

Detailed Description

Built for the 1999 Ford Ranger fuel system, Autotecnica FD0517372 is an in-tank electric fuel pump and sender assembly that supports both fuel delivery and fuel level reporting. The unit is configured for gasoline use, features a round tank seal with a 142.4 outside diameter and 3.5 seal thickness, and uses hose-style inlet and outlet connections for serviceable installation. With a 58 maximum pressure rating and 135 average flow rating, this assembly is specified for the vehicle application listed here. Autotecnica FD0517372 is also referenced by the same part number for interchange purposes.

This part cross-references Autotecnica (e.g., FD0517372) for the same application.

What This Part Helps Address

• Hard starting caused by weak or inconsistent fuel delivery
• Fuel gauge readings that no longer track tank level correctly
• Engine hesitation from inadequate pump output
• Fuel starvation under load from a failing in-tank pump
• Leaks at the tank seal or sender interface

Installation Notes and Tips

Verify the 1999 Ford Ranger application before installation and compare the connector, terminal count, hose-style inlet and outlet, and tank seal dimensions to the original unit. Replace the seal carefully to maintain a proper tank interface, and confirm the wiring harness connections match the vehicle’s 7-wire layout. Because this assembly is designed for in-tank use, cleanliness inside the tank and around the mounting area is important during service.

Quality Assurance

Autotecnica replacement components are cataloged to match specific vehicle applications and OE-style fitment requirements. FD0517372 is listed as a specific-fit assembly for the 1999 Ford Ranger, with the fuel sender, strainer, gasket/seal, and harness details provided for application matching.