/live/media/BV/BV_PF7982_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Baldwin PF7982 Fuel Filter
| Brand | Baldwin PF7982 |
|---|---|
| Fits | "case, hitachi, j.c. bamford, john deere, link-belt excavators; m |
| Grommets | [1] attached |
| Height | 5 15/32 |
| Height (mm) | 138.9 |
| Inside Diameter 1 | 1 1/32 |
| Inside Diameter 1 (mm) | 26.2 |
| O-Ring | [3] included |
| Outside Diameter 1 | 3 23/32 |
| Outside Diameter 1 (mm) | 94.5 |
| Related to | "{pf9803} (short version);{pf7983}, {pf7984} (long versions)" |
| Remark 2 | One end |
| Replaces | Hitachi 4642641; isuzu 8-98008-840-0; s-f filter sk3160 |
| Fits | — |
Fuel filter. Designed for clean fuel flow and dependable filtration.
Attached grommet. Includes a built-in grommet for easier service.
O-rings included. Supplied with three O-rings for a complete seal.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Baldwin PF7982 Fuel Filter Overview
The Baldwin PF7982 is a fuel filter for heavy-duty equipment and trucks that use the listed OE-style dimensions and sealing setup. It is a direct-reference replacement for applications from Case, Hitachi, J.C. Bamford, John Deere, Link-Belt Excavators, and Mitsubishi Trucks.
Use PF7982 when you need a fuel filter with a 5 15/32 in. height, 3 23/32 in. outside diameter, and 1 1/32 in. inside diameter. The attached grommet and included O-rings support a secure seal at the one-end configuration.
Key Features
- Baldwin PF7982 fuel filter for diesel fuel delivery systems
- Fits Case, Hitachi, J.C. Bamford, John Deere, Link-Belt Excavators, and Mitsubishi Trucks
- Height: 5 15/32 in. (138.9 mm)
- Outside diameter: 3 23/32 in. (94.5 mm)
- Inside diameter: 1 1/32 in. (26.2 mm)
- Attached grommet and [3] included O-rings
- One-end design for specified filter housings
- Cross-references Hitachi 4642641 and Isuzu 8-98008-840-0 for the same application
Detailed Description
The Baldwin PF7982 is built for fuel filtration applications where correct sealing and dimensional match are critical. Its listed measurements and included O-rings help it align with the specified housing style, while the attached grommet supports installation at the one-end connection point. This part number, PF7982, is commonly searched by buyers looking for a Baldwin fuel filter replacement for Case, Hitachi, John Deere, and Mitsubishi Trucks equipment.
Related Baldwin references include PF9803 as the short version, with PF7983 and PF7984 listed as long versions. If you are matching an existing service part, PF7982 is the reference to verify against the housing dimensions and OE cross numbers before ordering.
What This Fuel Filter Helps Address
- Fuel contamination entering the injection system
- Restricted fuel flow from a clogged filter element
- Hard starting caused by poor fuel filtration
- Engine hesitation tied to dirty diesel fuel
- Seal leakage at the filter-to-housing interface
Installation Notes and Tips
Confirm the housing dimensions, one-end configuration, and OE cross-reference before installation. Replace the filter only after cleaning the surrounding area to reduce contamination during service. Verify that the attached grommet and included O-rings seat correctly in the housing, and check for leaks after startup.
Quality Assurance
Baldwin filtration parts are specified by part number and dimensional data for accurate service matching. PF7982 is identified with OE cross-reference information for Hitachi and Isuzu applications, which helps technicians and buyers verify the correct replacement before installation.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||