/live/media/VI/VI_1010234_Fro.jpg)
BBB Industries 101-0234 Rack and Pinion Assembly
| Brand | BBB Industries 101-0234 |
|---|---|
| Bushings Included | No |
| Distance Between Mounting Holes (In) | 16.88 |
| Distance Between Mounting Holes (mm) | 428.752 |
| Hydraulic or Electric | Hydraulic |
| Inner Tie Rods Included | Yes |
| Input Shaft Diameter (In) | 0.75 |
| Input Shaft Diameter (mm) | 19.05 |
| Input Shaft Length (In) | 2 |
| Input Shaft Length (mm) | 50.8 |
| New or Remanufactured | Remanufactured |
| Number of Mounting Holes | 2 |
| Outer Tie Rods Included | No |
| Pressure Port Thread Size | 14mm |
| Rack Length (In) | 55.625 |
| Rack Length (mm) | 1412.875 |
| Return Port Thread Size | 11mm |
| Turns Lock To Lock | 3.75 |
| Product line | Reman Rack and Pinion |
| Fits | Ford and Lincoln · 4 vehicles |
Remanufactured assembly. A reman rack and pinion built for direct replacement use.
Hydraulic steering. Delivers responsive steering feel with hydraulic assist.
Inner tie rods included. Comes with inner tie rods for a more complete repair.
Cross-references 8L1Z-3504-A, 8L1Z-3504-ARM and 19320331 for the same application. See all 3.
Reman Rack and Pinion for Expedition and Navigator
BBB Industries Reman Rack and Pinion 101-0234 is a hydraulic steering gear assembly for select 2007-2008 Ford Expedition and 2007-2008 Lincoln Navigator models equipped with power steering. This remanufactured rack and pinion is built for direct steering system replacement where precise road feel and stable hydraulic assist are required.
Key Features
- Remanufactured hydraulic rack and pinion assembly
- Inner tie rods included; outer tie rods not included
- Input shaft diameter: 0.75 in. (19.05 mm)
- Input shaft length: 2 in. (50.8 mm)
- Rack length: 55.625 in. (1412.875 mm)
- Distance between mounting holes: 16.88 in. (428.752 mm)
- Pressure port thread size: 14 mm
- Return port thread size: 11 mm
- Turns lock to lock: 3.75
Product Details
BBB Industries Reman Rack and Pinion 101-0234 is part of the Reman Rack and Pinion product line, which focuses on remanufactured steering components for vehicles that use hydraulic assist. For 2007-2008 Ford Expedition and 2007-2008 Lincoln Navigator applications, this assembly provides the core rack housing and internal steering connection needed for steering response and wheel control. This part cross-references Ford OE numbers 8L1Z-3504-A and 8L1Z-3504-ARM for the same application.
What This Part Helps Address
- Excessive steering play or looseness
- Uneven or delayed steering response
- Hydraulic steering gear leakage at the rack assembly
- Noise or binding from a worn steering rack
- Restoring steering control in Expedition and Navigator power steering systems
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and power steering configuration before installation. Inspect hydraulic lines, mounting points, and tie rod ends during replacement, and confirm the pressure and return port thread sizes match the vehicle plumbing. Because outer tie rods are not included, reuse or replace them separately as needed. After installation, perform a professional wheel alignment and bleed the hydraulic steering system according to service procedures.
Quality Assurance
BBB Industries supplies remanufactured steering components for service replacement applications. This rack and pinion is remanufactured to support direct-fit service on the listed Ford Expedition and Lincoln Navigator models.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2008 | Ford | Expedition | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2008 | Lincoln | Navigator | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2007 | Ford | Expedition | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2007 | Lincoln | Navigator | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| No rows match your filter. | ||||