/live/media/VI/VI_1020181_Fro.jpg)
BBB Industries 102-0181 Rack and Pinion Assembly
| Brand | BBB Industries 102-0181 |
|---|---|
| Bushings Included | Yes |
| Distance Between Mounting Holes (In) | 13.63 |
| Distance Between Mounting Holes (mm) | 346.202 |
| Hydraulic or Electric | Hydraulic |
| Inner Tie Rods Included | Yes |
| Input Shaft Diameter (In) | 0.75 |
| Input Shaft Diameter (mm) | 19.05 |
| Input Shaft Length (In) | 2.125 |
| Input Shaft Length (mm) | 53.975 |
| New or Remanufactured | Remanufactured |
| Number of Mounting Holes | 3 |
| Outer Tie Rods Included | No |
| Pressure Port Thread Size | M18X1.50 |
| Rack Length (In) | 46.5 |
| Rack Length (mm) | 1181.1 |
| Return Port Thread Size | M16X1.50 |
| Turns Lock To Lock | 2.875 |
| Product line | Reman Rack and Pinion |
| Fits | Chrysler and Dodge · 14 vehicles |
Remanufactured unit. A cost-conscious replacement for the steering gear assembly.
Hydraulic design. Delivers responsive steering feel with fluid-assisted operation.
Inner tie rods included. Simplifies installation with key components already in place.
Cross-references 19320404 and RL782960AJ for the same application. See all 2.
Reman Rack and Pinion for Chrysler and Dodge
BBB Industries Reman Rack and Pinion 102-0181 is a hydraulic steering gear assembly built for direct replacement in select Chrysler and Dodge applications. It is remanufactured with inner tie rods included, bushings included, and OE-style port and mounting dimensions for a precise steering system service.
Key Features
- Remanufactured hydraulic rack and pinion assembly
- Inner tie rods included; outer tie rods not included
- Bushings included for installation support
- Pressure port thread size: M18x1.50
- Return port thread size: M16x1.50
- Input shaft diameter: 0.75 in. with 2.125 in. shaft length
- Rack length: 46.5 in. and 2.875 turns lock to lock
- Three mounting holes with 13.63 in. mounting-hole spacing
Detailed Description
BBB Industries 102-0181 is part of the Reman Rack and Pinion product line, a steering-focused remanufactured line built for hydraulic systems that require OE-style fit and function. This rack and pinion assembly is specified for 2005-2010 Chrysler 300, 2007-2010 Dodge Charger, and 2005-2008 Dodge Magnum models equipped with power steering. The design includes the correct input shaft dimensions, mounting-hole layout, and hydraulic port threads to support a proper steering gear replacement on these vehicles.
This part cross-references 19320404 and RL782960AJ for the same application. The BBB Industries 102-0181 is a practical choice when servicing a worn or leaking steering rack on Chrysler 300, Dodge Charger, or Dodge Magnum platforms.
What This Part Helps Address
- Steering fluid leaks from a worn rack and pinion assembly
- Excessive steering play or loose on-center feel
- Uneven steering response caused by internal rack wear
- Noisy or rough steering operation in hydraulic systems
- Replacement needs after damaged rack bushings or tie rod wear
Installation Notes and Tips
Verify power steering system configuration before ordering, since this assembly is listed for vehicles equipped with power steering only. Confirm the pressure and return port thread sizes, mounting-hole spacing, and input shaft dimensions against the original unit before installation. Because inner tie rods are included and outer tie rods are not, inspect the remaining steering linkage and replace any worn components during service. After installation, perform a full alignment and check for proper steering wheel center and hydraulic leak-free operation.
Quality Assurance
BBB Industries remanufactures steering components to support dependable replacement service in demanding chassis applications. The 102-0181 rack and pinion assembly is built as a remanufactured hydraulic unit with application-specific dimensions for Chrysler and Dodge steering systems.
- Fits 2005-2010 Chrysler 300, N/A; compatible with vehicles equipped with power steering.
- Fits 2007-2010 Dodge Charger, N/A; compatible with vehicles equipped with power steering.
- Fits 2005-2008 Dodge Magnum, N/A; compatible with vehicles equipped with power steering.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2010 | Chrysler | 300 | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2010 | Dodge | Charger | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2009 | Chrysler | 300 | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2009 | Dodge | Charger | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2008 | Chrysler | 300 | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2008 | Dodge | Charger | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2008 | Dodge | Magnum | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2007 | Chrysler | 300 | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2007 | Dodge | Charger | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2007 | Dodge | Magnum | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2006 | Chrysler | 300 | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2006 | Dodge | Magnum | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2005 | Chrysler | 300 | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2005 | Dodge | Magnum | AWD | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| No rows match your filter. | |||||