/live/media/VI/VI_3050148_Fro.jpg)
BBB Industries 305-0148 Rack and Pinion Assembly
| Brand | BBB Industries 305-0148 |
|---|---|
| Bushings Included | Yes |
| Distance Between Mounting Holes (In) | 6.38 |
| Distance Between Mounting Holes (mm) | 162.052 |
| Hydraulic or Electric | Hydraulic |
| Inner Tie Rods Included | Yes |
| Input Shaft Diameter (In) | 0.68 |
| Input Shaft Diameter (mm) | 17.28 |
| Input Shaft Length (In) | 4.875 |
| Input Shaft Length (mm) | 123.825 |
| New or Remanufactured | Remanufactured |
| Number of Mounting Holes | 2 |
| Outer Tie Rods Included | No |
| Pressure Port Thread Size | M16X1.50 |
| Rack Length (In) | 42.75 |
| Rack Length (mm) | 1085.85 |
| Return Port Thread Size | M16X1.50 |
| Turns Lock To Lock | 2.938 |
| Product line | Reman Rack and Pinion |
| Fits | Honda · 3 vehicles |
Remanufactured unit. A hydraulic rack and pinion assembly built for direct replacement.
Bushings included. Inner tie rods are included for a more complete install.
Precision steering feel. 2.938 turns lock to lock for responsive control.
Cross-references 19320613 for the same application. See all 1.
Reman Rack and Pinion for Accord Steering
BBB Industries 305-0148 is a remanufactured hydraulic rack and pinion assembly for 2003-2005 Honda Accord models equipped with power steering. It is built for direct steering-system replacement and includes inner tie rods and bushings for a service-ready fit.
Key Features
- Remanufactured hydraulic rack and pinion assembly
- Fits 2003-2005 Honda Accord, power steering applications
- Inner tie rods included; outer tie rods not included
- Bushings included
- Pressure and return port thread size: M16x1.50
- Rack length: 42.75 in. with 2.938 turns lock to lock
- Input shaft diameter: 0.68 in.; input shaft length: 4.875 in.
- Distance between mounting holes: 6.38 in.; 2 mounting holes
Product Details
This BBB Industries Reman Rack and Pinion line focuses on steering gear replacement built to match the original hydraulic layout used on the Honda Accord. Part number 305-0148 is a remanufactured rack and pinion assembly with the key connection points and dimensions needed for a proper steering-system service on 2003-2005 Honda Accord vehicles. This part cross-references Honda OE number 19320613 for the same application.
Common Steering Issues This Part Can Address
- Excessive steering play or loose steering feel
- Fluid leakage from the rack and pinion housing
- Worn inner tie rod joints affecting steering response
- Binding, rough steering, or inconsistent assist in hydraulic systems
- Noise from worn steering gear components
Installation Notes
Verify hydraulic port thread size, mounting-hole spacing, and input shaft dimensions before installation. This rack and pinion is for power steering applications only and uses M16x1.50 pressure and return ports. Confirm alignment and inspect related steering and suspension components during replacement to help restore proper steering geometry on the Honda Accord.
Quality Assurance
BBB Industries remanufactured steering components are processed as replacement assemblies for service use, with attention to fitment-critical dimensions and application-specific hardware configuration. Part number 305-0148 is intended for direct replacement on listed Honda Accord applications.
| Year | Make | Model | Transmission | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 2005 | Honda | Accord | Automatic | 3.0L | V6 | GAS | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2004 | Honda | Accord | Automatic | 3.0L | V6 | — | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 2003 | Honda | Accord | Automatic | 3.0L | V6 | — | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| No rows match your filter. | ||||||||