/live/media/VI/VI_3110141_Fro.jpg)
BBB Industries 311-0141 Rack and Pinion Assembly
| Brand | BBB Industries 311-0141 |
|---|---|
| Bushings Included | No |
| Hydraulic or Electric | Hydraulic |
| Inner Tie Rods Included | Yes |
| Input Shaft Diameter (In) | 0.688 |
| Input Shaft Diameter (mm) | 17.463 |
| Input Shaft Length (In) | 1.625 |
| Input Shaft Length (mm) | 41.275 |
| New or Remanufactured | Remanufactured |
| Number of Mounting Holes | 1 |
| Outer Tie Rods Included | No |
| Pressure Port Thread Size | M16x1.50 |
| Rack Length (In) | 46.375 |
| Rack Length (mm) | 1177.925 |
| Return Port Thread Size | M17x1.50 |
| Turns Lock To Lock | 2.938 |
| Product line | Reman Rack and Pinion |
| Fits | Toyota · 3 vehicles |
Remanufactured unit. A reman rack and pinion assembly for a cost-conscious replacement.
Hydraulic steering. Delivers responsive steering control with a traditional hydraulic design.
Inner tie rods included. Conveniently supplied as part of the assembly for a simpler install.
Cross-references 19320986 for the same application. See all 1.
Remanufactured Steering Rack for Toyota Camry
BBB Industries 311-0141 is a remanufactured hydraulic rack and pinion assembly for select 1988-1990 Toyota Camry models with power steering. It is built for direct steering system replacement where precise rack travel, hydraulic port sizing, and inner tie rod inclusion matter.
Key Features
- Remanufactured hydraulic rack and pinion assembly
- Fits 1988-1990 Toyota Camry with power steering
- Inner tie rods included; outer tie rods not included
- Input shaft diameter: 0.688 in. (17.463 mm)
- Pressure port thread size: M16x1.50
- Return port thread size: M17x1.50
- Rack length: 46.375 in. (1177.925 mm)
- Turns lock to lock: 2.938
Product Details
BBB Industries Reman Rack and Pinion line focuses on remanufactured steering gear assemblies for vehicles that require hydraulic steering response and OE-style fitment. Part number 311-0141 is a remanufactured rack and pinion assembly with one mounting hole, no bushings included, and inner tie rods already installed. This part cross-references 19320986 for the same application. Use 311-0141 when replacing a worn steering rack on a Toyota Camry from the 1988-1990 model years with power steering.
Common Steering Issues This Part Can Address
- Excessive steering play or loose on-center feel
- Hydraulic fluid leakage from the rack assembly
- Uneven or inconsistent steering response
- Noise or binding during steering input
- Wear in the rack and pinion gear mechanism
Installation Notes and Tips
Fits 1988-1990 Toyota Camry, power steering applications. Verify hydraulic line thread sizes, input shaft dimensions, and rack length before installation. Outer tie rods are not included, so inspect existing components and replace any worn steering linkage parts as needed. After installation, perform a full alignment and check for proper hydraulic operation and leak-free connections.
Quality Assurance
BBB Industries remanufactured steering components are processed to restore functional performance for replacement use. Confirm all vehicle-specific measurements and fitment details against the original steering gear before installation.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1990 | Toyota | Camry | 2.5L | V6 | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 1989 | Toyota | Camry | 2.5L | V6 | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| 1988 | Toyota | Camry | 2.5L | V6 | N/A | Compatible with vehicles equipped with power steering.; Reman Rack and Pinion |
| No rows match your filter. | ||||||