BBB Industries 313-0315 Rack and Pinion Assembly

Reman Rack and Pinion for Subaru Steering Repair

BBB Industries 313-0315 is a remanufactured hydraulic rack and pinion assembly for Subaru models equipped with power steering. It is built for direct steering-system replacement on 2008-2014 Subaru Impreza, 2013-2014 Subaru WRX, and 2013-2014 Subaru WRX STI applications.

Key Features

• Remanufactured rack and pinion assembly for hydraulic steering systems
• Includes bushings and inner tie rods
• Rack length: 49.188 in. (1249.363 mm)
• Input shaft diameter: 0.676 in. (17.158 mm)
• Input shaft length: 3 in. (76.2 mm)
• Pressure port thread size: M14x1.50
• Return port thread size: 16mm x 1.5
• Turns lock to lock: 2.75
• Outer tie rods are not included

BBB Industries Reman Rack and Pinion Line

The BBB Industries Reman Rack and Pinion line focuses on remanufactured steering gear assemblies built for direct-fit replacement. Part number 313-0315 follows that approach with hydraulic steering configuration, OE-style dimensions, and application-specific fitment for Subaru Impreza, WRX, and WRX STI models.

Detailed Description

BBB Industries 313-0315 is a reman rack and pinion assembly engineered for Subaru steering service where hydraulic assist is used. The unit includes inner tie rods and bushings, while the outer tie rods are not included. With a 49.188-inch rack length, 2.75 turns lock to lock, and OE-matched port thread sizes, this assembly supports a direct replacement path for steering gear wear, fluid leakage, and steering play on 2008-2014 Subaru Impreza, 2013-2014 Subaru WRX, and 2013-2014 Subaru WRX STI models. This part cross-references OE numbers 34110-FG031 and 19321244 for the same application.

Common Repair Uses

• Corrects steering looseness or excessive free play
• Addresses hydraulic fluid leaks at the rack and pinion assembly
• Restores steering response after internal gear wear
• Replaces a noisy or binding steering rack
• Supports repair of worn inner tie rod joints

Installation Notes and Tips

Verify hydraulic steering configuration before installation. Confirm input shaft diameter, port thread sizes, and rack length against the original unit to ensure proper fitment. Because outer tie rods are not included, inspect the existing outer tie rods and replace them if wear is present. After installation, perform a full alignment and check for leaks, proper steering effort, and centered wheel position.

Quality Assurance

BBB Industries supplies remanufactured steering components built to match application-specific requirements for Subaru Impreza, WRX, and WRX STI fitment. Part number 313-0315 is remanufactured and configured for hydraulic power steering service.