/live/media/VI/VI_8296_Fro.jpg)
BBB Industries 8296 Alternator
| Brand | BBB Industries 8296 |
|---|---|
| AC Tap | No |
| Amperage Rating | 105 |
| Brushless Design | No |
| Cooling Method | Air |
| Decoupled Or Clutch Pulley | No |
| Fan Type | Internal |
| Number Of Pulley Grooves | 6 |
| OE Manufacturer | Delco/Delphi |
| One Wire Capable | No |
| Outside Pulley Diameter (in) | 2-5/8 |
| Outside Pulley Diameter (mm) | 66 |
| Plug Clock Position | 11 |
| Polarity | Negative |
| Pulley Belt Type | Serpentine |
| Pulley Included | Yes |
| Pulley Type | Conventional |
| Rotation Direction | Clockwise |
| Series | CS130D |
| Voltage (V) | 12 |
| Voltage Regulator Type | Internal |
| Product line | REMAN ALTERNATOR |
| Fits | Honda · 1 vehicle |
Remanufactured unit. A reman alternator built to restore charging performance.
OE manufacturer pedigree. Built to Delco/Delphi specifications for dependable fit and function.
Internal regulator. Integrated voltage control helps simplify the charging system.
Cross-references 31100-RCA-A01 and 10480497 for the same application. See all 2.
Remanufactured Alternator for Honda Accord
BBB Industries 8296 is a remanufactured 12-volt alternator built for charging-system service on the 2003 Honda Accord. It uses an internal voltage regulator, clockwise rotation, and a serpentine-belt pulley setup to match the original application.
Key Features
- 105 amp amperage rating for OE-style charging output
- Reman alternator in the BBB Industries Reman Alternator line
- Internal voltage regulator with negative polarity
- Air-cooled design with internal fan
- 6-groove conventional pulley included
- OE manufacturer reference: Delco/Delphi CS130D series
- Plug clock position: 11
Product Details
BBB Industries 8296 is a remanufactured alternator for the 2003 Honda Accord, engineered around the original charging-system layout. The unit is specified at 105 amps and 12 volts, with a serpentine belt pulley, 6 pulley grooves, and clockwise rotation. The internal regulator and air-cooling design support direct replacement service where the OE-style electrical and mounting configuration is required. This part cross-references 31100-RCA-A01 and 10480497 for the same application.
The BBB Industries Reman Alternator line focuses on remanufactured electrical components built to match OE fit and function requirements. For Honda Accord charging-system repair, part number 8296 provides a practical replacement option when the original alternator shows signs of wear or output loss.
Common Problems This Part Can Address
- Battery warning light caused by alternator output loss
- Low charging voltage during driving or idle
- Dim lights or electrical instability from weak charging performance
- Noise or wear related to a failing alternator assembly
- Charging-system failure on a 2003 Honda Accord
Installation Notes and Tips
Verify pulley groove count, plug clock position, rotation direction, and regulator style before installation. Confirm the vehicle uses the specified serpentine-belt arrangement and compare the original connector and mounting points to the replacement unit. After installation, check charging voltage at the battery and inspect belt condition and tension to confirm proper system operation.
Quality Assurance
BBB Industries remanufactured electrical components are processed to support OE-style replacement service. Part number 8296 is built for the 2003 Honda Accord application listed above and should be matched to the vehicle’s original alternator specifications before installation.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2003 | Honda | Accord | 3.0L | V6 | N/A | 105 Amps; REMAN ALTERNATOR |
| No rows match your filter. | ||||||