/live/media/VI/VI_9700561A_Ang.jpg)
BBB Industries 97-00561A Disc Brake Caliper - Front Left
| Brand | BBB Industries 97-00561A |
|---|---|
| Position | Front Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 32 |
| Bleeder Screw Thread (in) | 7/16-20 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | No |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Gray |
| Caliper Finish | Rust Preventative |
| Caliper Slides Included | Not Applicable |
| Casting Material | Aluminum |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | Sumitomo/Nissan/4 |
| Inlet Fitting Type | Tube Seat |
| Inlet Port Thread Size (mm) | M10-1.0 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes Brake Pad Installation Hardware W/ Banjo Bolt & Copper Crush Washers - Where Applicable |
| Pads Included | No |
| Piston 1 Diameter (mm) | 40 |
| Piston Material | Steel |
| Piston Outside Diameter (in) | 2 |
| Piston Outside Diameter (mm) | 40 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Nissan · 3 vehicles |
Remanufactured caliper. Restored for dependable hydraulic braking performance.
Aluminum casting. Helps reduce weight while resisting corrosion.
Hardware included. Comes with brake pad installation hardware where applicable.
BBB Industries 97-00561A Front Left Caliper
BBB Industries 97-00561A is a remanufactured disc brake caliper for the front left position on select Nissan 300ZX models. It is built with an aluminum casting, steel pistons, and a gray rust-preventative finish for service-ready brake system replacement.
Compatible with 1990-1991 Nissan 300ZX front left and 1992 Nissan 300ZX front left through 03/92, this caliper is a direct-fit option for brake hydraulic repair on the Nissan 300ZX. The BBB Industries Reman Caliper w/ Installation Hardware line focuses on remanufactured brake components with application-specific hardware details where applicable.
Key Features
- Remanufactured disc brake caliper for front left installation
- Aluminum casting with steel pistons
- Gray caliper finish with rust preventative coating
- Includes bleeder screw and dust boots
- Tube seat inlet fitting with M10-1.0 inlet thread size
- 40 mm piston diameter and 4-piston design
- Brake pad installation hardware, banjo bolt, and copper crush washers included where applicable
Product Details
BBB Industries 97-00561A is a reman caliper engineered for brake hydraulic service on the Nissan 300ZX front left corner. The aluminum housing helps reduce weight, while the steel piston construction supports consistent hydraulic operation. This unit is finished with a rust preventative coating and includes a bleeder screw, dust boots, and hardware details listed for the application. Part number 97-00561A is a practical replacement when restoring braking performance on a 1990-1992 Nissan 300ZX.
Common Problems This Caliper Can Address
- Sticking or seized front left brake caliper
- Brake fluid leakage at the caliper body or bleeder area
- Uneven braking from worn piston or seal components
- Corrosion on the caliper housing or piston area
- Poor brake pedal response caused by hydraulic caliper wear
Installation Notes and Tips
Verify front left fitment before ordering: Fits 1990-1991 Nissan 300ZX, front left, and Fits 1992 Nissan 300ZX, front left, to 03/92. Confirm the M10-1.0 inlet thread size and tube seat fitting style match the vehicle brake line connection. Inspect brake hoses, pads, and rotors during installation, and bleed the brake system thoroughly after replacement. Part number 97-00561A should be matched to the vehicle’s original caliper configuration before installation.
Quality Assurance
BBB Industries remanufactured brake components are rebuilt for application-specific service replacement. This part cross-references OE-style brake caliper applications for the same vehicle fitment. Part number 97-00561A is intended for direct replacement use on the listed Nissan 300ZX front left applications.
| Year | Make | Model | Body Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1992 | Nissan | 300ZX | Coupe | 3.0L | V6 | Front Left | To 03/92; Reman Caliper w/ Installation Hardware |
| 1991 | Nissan | 300ZX | — | — | — | Front Left | Reman Caliper w/ Installation Hardware |
| 1990 | Nissan | 300ZX | — | 3.0L | V6 | Front Left | Reman Caliper w/ Installation Hardware |
| No rows match your filter. | |||||||