BBB Industries 97-02782A Disc Brake Caliper - Rear Right

Rear Right Reman Brake Caliper for Mercedes-Benz

BBB Industries 97-02782A is a remanufactured rear right disc brake caliper for select Mercedes-Benz, Chrysler Crossfire, and AMG applications. It uses a cast iron housing, steel pistons, and a gray rust-preventative finish to support dependable brake performance on the rear axle.

The BBB Industries Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics with application-specific fitment and the service parts needed for a proper caliper replacement. Part number 97-02782A is built for rear right use and matches the listed inlet and bleeder specifications for the covered vehicles.

Key Features

• Remanufactured disc brake caliper for rear right position
• Cast iron caliper housing with steel pistons
• Gray finish with rust preventative coating
• Dust boots included
• Bleeder screw included
• Inlet fitting type: plug
• Inlet port thread size: M10-1.0
• Bleeder screw thread size: M8-1.25
• 42 mm piston diameter, 2-piston design
• Housing cast numbers: 42/VL4

Detailed Description

BBB Industries 97-02782A is a reman brake caliper for rear right applications that require a 2-piston design with a 42 mm piston diameter. It is listed for 1994-2002 Mercedes-Benz SL600, 1996-1998 Mercedes-Benz SL500 with vented disc, 1998-2000 Mercedes-Benz C43 AMG, 1999-2002 Mercedes-Benz E55 AMG, 1999-2002 Mercedes-Benz SL500, 2000-2002 Mercedes-Benz E430, 2001-2004 Mercedes-Benz CLK55 AMG, 2002-2004 Mercedes-Benz C32 AMG with sport package, 2002-2004 Mercedes-Benz SLK32 AMG, 2003-2006 Mercedes-Benz CLK500, 2005-2006 Mercedes-Benz C55 AMG, 2005-2006 Chrysler Crossfire, 2006-2010 Mercedes-Benz SLK55 AMG, and 2007-2009 Mercedes-Benz CLK550. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What This Caliper Helps Address

• Rear brake drag caused by a sticking caliper piston
• Uneven rear brake pad wear from caliper seizure
• Brake fluid leakage at the caliper body or bleeder area
• Reduced braking response from worn hydraulic components
• Corrosion-related caliper performance issues on the rear right side

Installation Notes and Tips

Verify rear right placement, piston size, inlet thread size, and bleeder screw specification before installation. Transfer or replace brake pads as needed, and inspect the brake hose, banjo bolt, and copper crush washers where applicable. After installation, bleed the brake system thoroughly and confirm there are no leaks at the inlet or bleeder screw.

Quality Assurance

BBB Industries remanufactures brake hydraulics to application-specific specifications for listed vehicle coverage. Part number 97-02782A is built as a remanufactured replacement caliper for the confirmed Mercedes-Benz and Chrysler Crossfire fitments shown above.