BBB Industries 97-17451B Disc Brake Caliper - Front Right

Remanufactured Front Right Brake Caliper

BBB Industries 97-17451B is a remanufactured disc brake caliper for the front right position on select Chevrolet full-size models. It is built with a cast iron housing, a steel piston, and a gray rust-preventative finish for service replacement on 1967-1970 Chevrolet Bel Air, Caprice, and Impala applications.

The BBB Industries Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics with the correct mounting and inlet details for direct replacement service. Part number 97-17451B is specified for vehicles using a single-piston front right caliper with a banjo bolt inlet and 7/16-20 inlet thread.

Key Features

• Remanufactured disc brake caliper for front right installation
• Cast iron caliper housing with steel piston construction
• Gray caliper finish with rust preventative coating
• Single 3 in. / 75 mm piston design
• Banjo bolt inlet fitting type
• Bleeder screw included; dust boots included
• Brake pad installation hardware included where applicable
• Fits 1967-1970 Chevrolet Bel Air, Caprice, and Impala, front right

Detailed Description

BBB Industries 97-17451B is a remanufactured front right disc brake caliper engineered for classic Chevrolet applications that use a one-piston front disc brake setup. It features a cast iron body, steel piston, and rust preventative finish to match the service requirements of older hydraulic brake systems. The caliper uses a banjo bolt inlet with 7/16-20 thread size and includes a bleeder screw for brake service.

This part number 97-17451B is listed for 1967-1970 Chevrolet Bel Air, 1967-1970 Chevrolet Caprice, and 1967-1970 Chevrolet Impala in the front right position. If you are replacing a worn or sticking caliper on a Chevrolet Bel Air, Caprice, or Impala, this remanufactured unit provides the correct fitment details for the original disc brake configuration.

What It Helps Address

• Uneven front brake performance caused by a sticking caliper
• Brake fluid leakage at the caliper body or inlet connection
• Corrosion on an aging front disc brake caliper
• Brake drag from a seized piston or damaged dust boot
• Reduced braking response on classic Chevrolet front disc brake systems

Installation Notes and Tips

Verify the vehicle uses the front right disc brake caliper configuration with a single piston, banjo bolt inlet, and 7/16-20 inlet thread before installation. Inspect brake hoses, pads, and related hydraulic components for wear or contamination during service. Bleed the brake system after installation and confirm proper pedal feel and leak-free operation.

Quality Assurance

BBB Industries remanufactures brake hydraulics to service replacement standards, and this caliper is supplied with the listed hardware and service components noted in the product attributes. Confirm all fitment details against the vehicle before installation.