/live/media/VI/VI_9900859A_Ang.jpg)
BBB Industries 99-00859A Disc Brake Caliper - Rear Right
| Brand | BBB Industries 99-00859A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 28 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Gray |
| Caliper Finish | Rust Preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast Iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | BC141117 |
| Inlet Fitting Type | Banjo Bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes Brake Pad Installation Hardware W/ Banjo Bolt & Copper Crush Washers - Where Applicable |
| Pads Included | No |
| Piston 1 Diameter (mm) | 30 |
| Piston Material | Steel |
| Piston Outside Diameter (in) | 1 |
| Piston Outside Diameter (mm) | 30 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Hyundai · 1 vehicle |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron housing. Provides durable braking performance with a rust-preventative finish.
Complete hardware included. Comes with bracket, bleeder screw, dust boots, and slides.
Rear Right Brake Caliper for 2010 Hyundai Elantra
Restore rear braking performance with this BBB Industries remanufactured disc brake caliper for the 2010 Hyundai Elantra, rear right. Part number 99-00859A is built as a reman caliper with installation hardware and is configured with a bracket, bleeder screw, dust boots, and caliper slides for a direct-service replacement.
Key Features
- Fits 2010 Hyundai Elantra, rear right
- BBB Industries Reman Caliper w/ Installation Hardware line
- Part number 99-00859A
- Remanufactured cast iron caliper with gray rust preventative finish
- Single 30 mm steel piston
- Banjo bolt inlet fitting with M10-1.0 thread size
- Bracket included for the specified application
- Bleeder screw, dust boots, and caliper slides included
- No pads included
Product Details
This BBB Industries disc brake caliper is remanufactured to match the original rear right brake layout on the 2010 Hyundai Elantra. The cast iron housing, steel piston, and rust preventative finish are selected for service durability, while the included bracket and slides support proper caliper movement and alignment. The 30 mm piston size and banjo bolt inlet fitting make this 99-00859A a focused replacement for the specified brake hydraulics application.
The BBB Industries Reman Caliper w/ Installation Hardware product line is built for brake service work where a remanufactured caliper assembly is needed with key service components already in place. For Hyundai Elantra brake repair, 99-00859A provides a direct-fit rear right caliper solution for the listed vehicle application.
Common Problems This Part Can Address
- Sticking or seized rear caliper movement
- Uneven rear brake pad wear
- Brake fluid leakage at the caliper body or bleeder area
- Reduced rear braking response from worn hydraulic components
- Noisy or inconsistent rear brake operation caused by caliper wear
Installation Notes and Tips
Before installation, verify bracket compatibility with your vehicle and confirm the rear right position. This caliper uses an M10-1.0 inlet thread and includes a bleeder screw; copper crush washers are included where applicable. Pads are not included, so inspect the existing pads and related brake hardware before reassembly. Always bleed the brake system after installation and confirm proper pedal feel before returning the vehicle to service.
Quality Assurance
BBB Industries remanufactured brake components are processed for service replacement use and inspected to meet application-specific requirements for the listed fitment. Part number 99-00859A is identified for the 2010 Hyundai Elantra rear right brake caliper application.
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2010 | Hyundai | Elantra | Sedan | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | |||||