/live/media/VI/VI_9901005A_Lef.jpg)
BBB Industries 99-01005A Disc Brake Caliper - Rear Right
| Brand | BBB Industries 99-01005A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.25 x 25 |
| Bleeder Screw Thread (mm) | M10-1.25 |
| Bleeder Thread Size | M10-1.25 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Gray |
| Caliper Finish | Rust Preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast Iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 7CLP13S, R |
| Inlet Fitting Type | Banjo Bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes Brake Pad Installation Hardware W/ Banjo Bolt & Copper Crush Washers - Where Applicable |
| Pads Included | No |
| Piston 1 Diameter (mm) | 30 |
| Piston Material | Steel |
| Piston Outside Diameter (in) | 1 |
| Piston Outside Diameter (mm) | 30 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Acura and Honda · 6 vehicles |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron construction. Provides durable braking performance with a rust-preventative finish.
Complete hydraulic setup. Includes bleeder screw, bracket, dust boots, and steel piston.
Rear Right Reman Brake Caliper for Integra and CRX
BBB Industries 99-01005A is a remanufactured disc brake caliper for the rear right position. It is built with a cast iron housing, gray rust-preventative finish, steel piston, and included bracket, making it a direct replacement option for select Acura Integra and Honda CRX applications.
This BBB Industries reman caliper w/ installation hardware line focuses on replacement brake hydraulics with the mounting and service details needed for a proper brake repair. Part number 99-01005A is specified for rear right use on 1990-1993 Acura Integra and 1990-1991 Honda CRX models.
Key Features
- Remanufactured disc brake caliper for rear right placement
- Cast iron caliper body with rust-preventative finish
- Steel piston with 30 mm diameter
- Bracket included for the specified application
- Caliper slides included
- Bleeder screw included; banjo bolt inlet fitting
- Dust boots included
- Gray caliper color
- Part number 99-01005A
Application Details
Compatible with 1990-1993 Acura Integra, rear right, and 1990-1991 Honda CRX, rear right. The caliper uses an M10-1.0 inlet thread and an M10-1.25 bleeder thread, with a single 30 mm piston for the listed brake setup. BBB Industries 99-01005A is a fitment-specific replacement for these rear brake applications.
What This Caliper Helps Address
- Sticking or seized rear brake caliper movement
- Brake fluid leakage at the caliper body or bleeder area
- Uneven rear braking caused by worn hydraulic components
- Corrosion on the original caliper housing
- Brake drag related to worn piston or slide components
Installation Notes
Verify rear right fitment before purchase and confirm the bracket configuration matches your vehicle. Use the correct banjo bolt and copper crush washers where applicable, and bleed the brake system after installation to remove air from the hydraulic circuit. Inspect brake hoses, pads, and related hardware during service to complete the repair properly.
Quality Assurance
BBB Industries remanufactured brake components are rebuilt for replacement use in hydraulic brake service. Part number 99-01005A is produced as a reman caliper with the listed application-specific hardware details for Acura Integra and Honda CRX rear brake service.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 1993 | Acura | Integra | — | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1992 | Acura | Integra | — | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1991 | Acura | Integra | — | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1991 | Honda | CRX | Si | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1990 | Acura | Integra | — | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1990 | Honda | CRX | Si | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | |||||