/live/media/VI/VI_9901160A_Lef.jpg)
BBB Industries 99-01160A Disc Brake Caliper - Rear Right
| Brand | BBB Industries 99-01160A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M7-1.0 x 32 |
| Bleeder Screw Thread (mm) | M7-1.0 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Gray |
| Caliper Finish | Rust Preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast Iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | M080, R, 1706469 |
| Inlet Fitting Type | Banjo Bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes Brake Pad Installation Hardware W/ Banjo Bolt & Copper Crush Washers - Where Applicable |
| Pads Included | No |
| Piston 1 Diameter (mm) | 30 |
| Piston Material | Steel |
| Piston Outside Diameter (in) | 1 |
| Piston Outside Diameter (mm) | 30 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Mazda · 8 vehicles |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron housing. Delivers durable braking performance with a rust-preventative finish.
Complete hardware included. Comes with a bracket, bleeder screw, and dust boots.
Remanufactured Rear Right Caliper for Mazda Protege
BBB Industries 99-01160A is a remanufactured disc brake caliper for the rear right position on select Mazda Protege and Mazda Protege5 models. It is built with a cast iron housing, gray rust-preventative finish, and a steel piston for dependable brake hydraulic performance.
Key Features
- Remanufactured disc brake caliper with installation hardware
- Fits 2001-2003 Mazda Protege, rear right
- Fits 2002-2003 Mazda Protege5, rear right
- Cast iron construction with gray rust-preventative finish
- Single 30 mm steel piston
- Includes caliper slides, bracket, dust boots, bleeder screw, and hardware
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- M7-1.0 bleeder screw thread and M7-1.0 x 32 bleeder screw size
Product Details
The BBB Industries Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics built for direct replacement applications. Part number 99-01160A is configured for the rear right brake position and uses a 30 mm piston, banjo bolt inlet, and bracketed design for the specified Mazda applications. For shoppers searching for a rear right brake caliper for 2001-2003 Mazda Protege or 2002-2003 Mazda Protege5, 99-01160A provides the core hydraulic components needed for brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake fluid leakage at the caliper body or bleeder area
- Uneven rear braking caused by a sticking piston
- Corrosion on the original rear right caliper housing
- Brake drag from worn slides or internal caliper wear
- Reduced braking response from a failing hydraulic caliper assembly
Installation Notes
Verify rear right fitment against the vehicle before installation. This caliper uses a banjo bolt inlet and M10-1.0 inlet thread, so the brake hose connection and copper crush washers must match the application. The bracket is included, while bracket mounting bolts are not listed as included. Bleeding the brake system after installation is required to remove air from the hydraulic circuit.
Quality Assurance
BBB Industries remanufactures brake components to restore serviceable hydraulic function for direct replacement use. Part number 99-01160A is a remanufactured caliper assembly for the specified Mazda Protege and Mazda Protege5 rear right applications.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2003 | Mazda | Protege | DX | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2003 | Mazda | Protege | ES | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2003 | Mazda | Protege | LX | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2003 | Mazda | Protege | SE | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2003 | Mazda | Protege5 | Base | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2002 | Mazda | Protege | — | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2002 | Mazda | Protege5 | — | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2001 | Mazda | Protege | — | Rear Right | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | |||||