/live/media/VI/VI_9909127A_Ang.jpg)
BBB Industries 99-09127A Disc Brake Caliper - Front Left
| Brand | BBB Industries 99-09127A |
|---|---|
| Position | Front Left |
| Pads Included | No |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Inlet Fitting Type | Banjo bolt |
| Caliper Color | Gray |
| Piston Material | Phenolic |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 28 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Finish | Rust preventative |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 781/285, 57/25 |
| Inlet Port Thread Size (mm) | M12-1.0 x 20.9 |
| Inlet Thread Size | M12-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Diameter (mm) | 57 |
| Piston Outside Diameter (in) | 2 |
| Piston Outside Diameter (mm) | 57 |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Saab · 8 vehicles |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron housing. Delivers durable braking performance with a rust-preventative finish.
Phenolic piston. Helps reduce heat transfer for more consistent brake operation.
Remanufactured Front Left Caliper for Saab 9-3
BBB Industries 99-09127A is a remanufactured disc brake caliper for the front left position. It is built with a cast iron housing, a phenolic piston, and a gray rust-preventative finish for service on select Saab 9-3 and Saab 9-3X applications.
The BBB Industries Reman Caliper w/ Installation Hardware line focuses on replacement calipers that arrive with the core service components needed for brake repair. For this application, the caliper includes a mounting bracket, caliper slides, a bleeder screw, dust boots, and brake pad installation hardware with banjo bolt and copper crush washers where applicable.
- Part number: 99-09127A
- Remanufactured disc brake caliper for the front left side
- Cast iron caliper body with gray rust-preventative finish
- Single 57 mm phenolic piston
- Includes caliper slides, bracket, bleeder screw, dust boots, and hardware
- Banjo bolt inlet fitting with M12-1.0 inlet thread size
- Bleeder screw size: M10-1.0 x 28
- Fits 2006-2011 Saab 9-3, front left, with 285mm disc and supplied mounting bracket
- Fits 2010-2011 Saab 9-3X, front left; verify bracket compatibility before purchase
Use this caliper when replacing a worn, sticking, leaking, or unevenly operating front brake caliper on a Saab 9-3 or Saab 9-3X. It is also a direct replacement for front left brake service where the original caliper uses a 57 mm piston and the specified bracket configuration.
- Restores proper hydraulic clamping at the front left wheel
- Addresses brake fluid leakage from worn seals or damaged housing
- Helps correct dragging, seized, or uneven caliper movement
- Supports brake pad replacement when the caliper hardware is worn or corroded
- Provides a replacement for calipers with matching inlet and bleeder thread specifications
Installation should be performed with the correct brake fluid, clean mounting surfaces, and verified bracket and rotor compatibility. For 2010-2011 Saab 9-3X applications, confirm the caliper bracket matches your vehicle before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality assurance for this BBB Industries brake caliper centers on remanufactured construction, inspected housing components, and included service hardware for the listed applications. Part number 99-09127A is specified for confirmed front left fitment on select Saab brake repairs.
Compatible Vehicles
- Fits 2006-2011 Saab 9-3, front left, supplied with mounting bracket and 285mm disc application
- Fits 2010-2011 Saab 9-3X, front left, verify bracket compatibility before purchase
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2011 | Saab | 9-3 | — | — | Front Left | Supplied w/ Mounting Bracket; w/ 285mm Disc; Reman Caliper w/ Installation Hardware |
| 2011 | Saab | 9-3X | — | — | Front Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2010 | Saab | 9-3 | — | — | Front Left | Supplied w/ Mounting Bracket; w/ 285mm Disc; Reman Caliper w/ Installation Hardware |
| 2010 | Saab | 9-3X | — | — | Front Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 2009 | Saab | 9-3 | — | — | Front Left | Supplied w/ Mounting Bracket; w/ 285mm Disc; Reman Caliper w/ Installation Hardware |
| 2008 | Saab | 9-3 | 2.0L | L4 | Front Left | Supplied w/ Mounting Bracket; w/ 285mm Disc; Reman Caliper w/ Installation Hardware |
| 2007 | Saab | 9-3 | 2.0L | L4 | Front Left | Supplied w/ Mounting Bracket; w/ 285mm Disc; Reman Caliper w/ Installation Hardware |
| 2006 | Saab | 9-3 | 2.0L | L4 | Front Left | Supplied w/ Mounting Bracket; w/ 285mm Disc; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | ||||||