/live/media/VI/VI_9917281B_Ang.jpg)
BBB Industries 99-17281B Disc Brake Caliper - Rear Left
| Brand | BBB Industries 99-17281B |
|---|---|
| Position | Rear Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 33 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Gray |
| Caliper Finish | Rust Preventative |
| Caliper Slides Included | Yes |
| Casting Material | Aluminum |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 4261-444 |
| Inlet Fitting Type | Banjo Bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes Brake Pad Installation Hardware W/ Banjo Bolt & Copper Crush Washers - Where Applicable |
| Pads Included | No |
| Piston 1 Diameter (mm) | 54 |
| Piston Material | Steel |
| Piston Outside Diameter (in) | 2 |
| Piston Outside Diameter (mm) | 54 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Chevrolet · 6 vehicles |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Aluminum casting. Lightweight construction with a rust-preventative finish.
Complete hardware included. Comes with a bleeder screw, bracket, and dust boots.
Rear Left Reman Caliper for Caprice and Impala
BBB Industries 99-17281B is a remanufactured disc brake caliper for the rear left position on select 1994-1996 Chevrolet Caprice and 1994-1996 Chevrolet Impala models. It is built with an aluminum casting, a steel piston, and a gray rust-preventative finish for service replacement on the rear brake hydraulic system.
Key Features
- Remanufactured disc brake caliper with installation hardware
- Fits the rear left position on 1994-1996 Chevrolet Caprice and Impala
- 54 mm steel piston for hydraulic braking force
- Aluminum casting with rust-preventative finish
- Includes caliper slides, bracket, dust boots, and bleeder screw
- Banjo bolt inlet fitting with M10-1.0 thread size
- Brake pad installation hardware, banjo bolt, and copper crush washers included where applicable
Product Details
This BBB Industries reman caliper w/ installation hardware is engineered for rear left brake service on the Chevrolet Caprice and Chevrolet Impala platform. Part number 99-17281B uses a single 54 mm piston, steel piston construction, and a banjo bolt inlet fitting with M10-1.0 thread specifications. The caliper arrives with a bracket, caliper slides, dust boots, and a bleeder screw to support a complete hydraulic brake repair. Housing cast number 4261-444 is listed for identification during parts matching.
BBB Industries reman caliper w/ installation hardware 99-17281B is a direct service part for drivers searching for a rear left brake caliper for 1994-1996 Chevrolet Caprice or 1994-1996 Chevrolet Impala. It is a remanufactured replacement for disc brake caliper applications where the original rear left unit has worn seals, sticking slides, or hydraulic leakage.
Common Repair Uses
- Restores rear left brake pressure after caliper seal wear
- Addresses uneven braking caused by sticking caliper movement
- Replaces a leaking or corroded rear brake caliper
- Helps correct brake drag from damaged piston or slide components
- Supports brake service on Chevrolet Caprice and Impala rear left applications
Installation Notes
Verify bracket and inlet fitting details before installation, especially on 1994-1996 Chevrolet Caprice and Impala rear left applications. Transfer or replace brake pads as needed, and follow proper bleeding procedures after connecting the banjo bolt and copper crush washers where applicable. Confirm thread sizes and caliper orientation before final torque.
Quality Assurance
BBB Industries remanufactured brake components are rebuilt for service replacement and inspected for fitment-critical details such as piston size, thread specification, and mounting configuration. Part number 99-17281B is supplied as a reman caliper w/ installation hardware for the listed applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1996 | Chevrolet | Caprice | Rear Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1996 | Chevrolet | Impala | Rear Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1995 | Chevrolet | Caprice | Rear Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1995 | Chevrolet | Impala | Rear Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1994 | Chevrolet | Caprice | Rear Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| 1994 | Chevrolet | Impala | Rear Left | Prior to purchase, ensure compatibility of this disc brake caliper bracket with your vehicle.; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | ||||