BBB Industries 99-17324B Disc Brake Caliper - Front Right

Front Right Reman Caliper for 2004 Pontiac GTO

BBB Industries 99-17324B is a remanufactured disc brake caliper for the front right position on the 2004 Pontiac GTO. It includes a bracket and installation hardware components listed in the product data, along with a gray rust-preventative finish for service-ready replacement.

Key Features

• Remanufactured disc brake caliper for front right application
• Cast iron housing with steel pistons
• 42 mm dual-piston design
• Caliper slides included
• Bleeder screw included
• Bracket included
• Gray finish with rust preventative coating
• Banjo bolt inlet fitting with M10-1.0 thread size
• Dust boots included

BBB Industries Reman Caliper Line

The BBB Industries Reman Caliper w/ Installation Hardware line focuses on remanufactured brake hydraulics built to match the original caliper configuration and mounting style. Part number 99-17324B follows that approach with a bracketed front right layout, dual 42 mm pistons, and the specified inlet and bleeder thread sizes for the 2004 Pontiac GTO brake system.

Detailed Description

BBB Industries 99-17324B is a reman caliper assembly for the front right side of the 2004 Pontiac GTO. It uses a cast iron body, steel pistons, and a rust-preventative gray finish, with caliper slides, dust boots, and a bleeder screw included. The unit is built with a banjo bolt inlet and M10-1.0 thread specifications, and the package contents note brake pad installation hardware with banjo bolt and copper crush washers where applicable. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

Common Brake Issues This Part Can Address

• Sticking or seized front right caliper movement
• Uneven brake pad wear on the passenger-side front brake
• Brake fluid leakage at the caliper body or inlet connection
• Reduced braking response from worn piston or seal components
• Corrosion-related caliper performance problems

Installation Notes and Tips

Compatible With 2004 Pontiac GTO, front right. Verify bracket style, inlet fitting type, and thread sizes before installation. Inspect brake hoses, pads, and rotors for wear, and bleed the hydraulic system after replacement to remove air from the brake circuit. Confirm that the caliper bracket and mounting points match the vehicle before final assembly.

Quality Assurance

BBB Industries remanufactured brake components are rebuilt to restore proper caliper function using the specified housing, piston, and hardware configuration listed for this application. Part number 99-17324B is identified for the 2004 Pontiac GTO front right brake position.