/live/media/VI/VI_9917356A_Ang.jpg)
BBB Industries 99-17356A Disc Brake Caliper - Front Right
| Brand | BBB Industries 99-17356A |
|---|---|
| Position | Front Right |
| Pads Included | No |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Inlet Fitting Type | Banjo bolt |
| Caliper Color | Gray |
| Piston Material | Steel |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | M10-1.0 x 32 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Finish | Rust preventative |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 5702 |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Diameter (mm) | 57 |
| Piston Outside Diameter (in) | 2 |
| Piston Outside Diameter (mm) | 57 |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Includes installation hardware for a ready-to-install replacement.
Cast iron construction. Provides a durable housing with a rust-preventative finish.
Dual-piston design. Delivers consistent braking force with steel pistons and dust boots.
BBB Industries Reman Caliper w/ Installation Hardware
BBB Industries 99-17356A is a remanufactured disc brake caliper built for brake hydraulic service where a direct replacement caliper is needed. It features a cast iron housing, gray rust-preventative finish, a 57 mm steel piston, and a bracket with caliper slides included for a more complete service replacement.
This reman caliper includes a bleeder screw, dust boots, and brake pad installation hardware with banjo bolt and copper crush washers where applicable. The BBB Industries Reman Caliper w/ Installation Hardware line focuses on service-ready brake hydraulics for vehicles that need dependable caliper restoration without replacing the entire brake system.
Key Features
- Remanufactured disc brake caliper for brake hydraulic repair
- Cast iron housing with gray rust-preventative finish
- 57 mm steel piston with dual-piston design
- Bracket included with caliper slides included
- Bleeder screw included
- Dust boots included
- Banjo bolt inlet fitting type
- Brake pad installation hardware included where applicable
- Part number 99-17356A for catalog matching
Product Details
BBB Industries 99-17356A is a reman caliper assembly for brake service applications that require a replacement disc brake caliper with the correct hydraulic connection and mounting configuration. The cast iron body and steel pistons support consistent brake pressure transfer, while the included bracket and slides help simplify caliper replacement on the vehicle. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Use this caliper when servicing brake drag, leaking caliper seals, uneven pad wear, or reduced braking performance on a vehicle that calls for this specific caliper design. Search terms such as remanufactured brake caliper with bracket, 57 mm dual piston disc brake caliper, and BBB Industries 99-17356A brake hydraulics replacement are relevant for this part.
Compatible With select vehicle applications that use this caliper configuration; verify the mounting style, inlet thread, and piston size before ordering. Part number 99-17356A is also useful when matching the correct brake hydraulic replacement during a front or rear caliper service on supported make/model applications.
Common Repair Uses
- Leaking caliper seals or fluid loss at the wheel end
- Sticking or seized caliper piston movement
- Uneven brake pad wear caused by caliper binding
- Brake pull or reduced stopping performance from a worn caliper
- Corrosion-related caliper replacement during brake service
Installation Notes
Confirm the banjo bolt inlet fitting, M10-1.0 inlet thread, and 57 mm piston size against the original caliper before installation. Bleed the brake system after replacement, inspect the brake hose and copper crush washers where applicable, and verify pad and rotor condition before returning the vehicle to service. Vehicle-specific fitment should be matched to the original brake hardware and mounting layout.
Quality Assurance
BBB Industries remanufactured brake components are processed for brake system replacement use and built to meet the dimensional and functional requirements of the original application. Part number 99-17356A is a reman caliper option for buyers seeking a catalog-matched brake hydraulic replacement.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||